The effect of temperature on the extrusion behavior of a polymer/ceramic refractory paste

被引：9
|
作者：
Wells, LJ [1 ]
Nightingale, SA [1 ]
Spinks, GM [1 ]
机构：
[1] Univ Wollongong, Inst Steel Proc & Prod, Fac Engn, Wollongong, NSW 2522, Australia
来源：
JOURNAL OF MATERIALS SCIENCE | 2005年 / 40卷 / 02期
关键词：
D O I：
10.1007/s10853-005-6084-4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of temperature on the extrusion behavior of a polymer/ceramic refractory paste, known as taphole clay, has been investigated. Experiments were performed to determine the extrusion pressure and the viscosity of the paste's phenolic resin binder between 30 and 60degreesC. The extrusion parameters were determined using the Benbow and Bridgwater method [1]. As the temperature was increased, a decrease in the extrusion pressure was observed. Three of the four Benbow and Bridgwater extrusion parameters were found to be dependent on temperature and the binder's viscosity. From this data a model was produced using a modified Benbow and Bridgwater equation that predicts the effect of temperature on the extrusion pressure of the paste. (C) 2005 Springer Science + Business Media, Inc.
引用
收藏
页码：315 / 321
页数：7
相关论文
共 50 条
  • [1] The effect of temperature on the extrusion behavior of a polymer/ceramic refractory paste
    L. J. Wells
    S. A. Nightingale
    G. M. Spinks
    [J]. Journal of Materials Science, 2005, 40 : 315 - 321
  • [2] Roller extrusion of a ceramic paste
    Peck, MC
    Rough, SL
    Wilson, DI
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2005, 44 (11) : 4099 - 4111
  • [3] THE EFFECT OF TEMPERATURE ON RHEOLOGICAL PROPERTIES OF CERAMIC PASTE
    TRAVNICKOVA, J
    HAVRDA, J
    OUJIRI, F
    [J]. SILIKATY, 1989, 33 (01): : 17 - 22
  • [4] On-line monitoring of ceramic paste extrusion
    Amarasinghe, S
    Wilson, I
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1999, 82 (09) : 2305 - 2312
  • [5] Extrusion of TiO2 ceramic powder paste
    Chevalier, L
    Hammond, E
    Poitou, A
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 72 (02) : 243 - 248
  • [6] A rheology model on extrusion flow of ceramic powder paste
    Li, SB
    Lu, ZL
    Gao, JQ
    Jin, ZH
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2002, 31 : 198 - 201
  • [7] Design of ceramic paste formulations for co-extrusion
    Powell, Jonathan
    Assabumrungrat, Suttichai
    Blackburn, Stuart
    [J]. POWDER TECHNOLOGY, 2013, 245 : 21 - 27
  • [8] THE INFLUENCE OF POWDER PACKING ON PASTE EXTRUSION BEHAVIOR
    BLACKBURN, S
    BOHM, H
    [J]. CHEMICAL ENGINEERING RESEARCH & DESIGN, 1993, 71 (A3): : 250 - 256
  • [9] HIGH-TEMPERATURE EXTRUSION BEHAVIOR OF A SUPERPLASTIC ZIRCONIA-BASED CERAMIC
    KELLETT, BJ
    CARRY, C
    MOCELLIN, A
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1990, 73 (07) : 1922 - 1927
  • [10] High-temperature extrusion behavior of a superplastic zirconia-based ceramic
    [J]. Kellett, Bruce J., 1922, (73):
12345