Thermal Modelling of a Fractional-Slot Concentrated-Winding Kaman Type Axial-Flux Permanent-Magnet Machine

被引：0
|
作者：
Vainel, Gy. [1 ]
Staton, D. A. [1 ]
Capponi, F. Giulii [2 ]
De Donato, G. [2 ]
Caricchi, F. [2 ]
机构：
[1] Motor Design Ltd, Ellesmere, Shrops, England
[2] Univ Roma La Sapienza, Dept Aeronaut, Elect & Energetic Engn, Rome, Italy
来源：
2013 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE) | 2013年
关键词：
ELECTRICAL MACHINES; ELEMENT; DESIGN;
D O I：
暂无
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
The aim of the paper is to present the thermal modeling of a Kaman type Axial-Flux Permanent-Magnet machine with fractional-slot concentrated-winding. This machine is air-cooled and equipped with specific arrangements to enhance heat dissipation. Thermal paths inside the machine are quite complex and require three-dimensional modelling. This is achieved through a lumped parameter network and subdivision of machine into cuboidal elements. The paper describes how thermal modeling is achieved and compares simulations with experimental results taken from a full scale prototype equipped with a number of thermocouples.
引用
下载
收藏
页码：1505 / 1511
页数：7
相关论文
共 50 条
  • [1] Fractional-Slot Concentrated-Winding Axial-Flux Permanent-Magnet Machine With Tooth-Wound Coils
    Capponi, Fabio Giulii
    De Donato, Giulio
    Rivellini, Giovanni Antonio
    Caricchi, Federico
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2014, 50 (04) : 2446 - 2457
  • [2] Fractional-Slot Concentrated-Winding Axial-Flux Permanent-Magnet Machine With Tooth-Wound Coils
    Capponi, F. Giulii
    De Donato, G.
    Rivellini, G. A.
    Caricchi, F.
    2012 XXTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2012, : 281 - 287
  • [3] Fractional-Slot Concentrated-Winding Axial-Flux Permanent-Magnet Machine With Core-Wound Coils
    De Donato, Giulio
    Capponi, Fabio Giulii
    Caricchi, Federico
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2012, 48 (02) : 630 - 641
  • [4] Fractional-Slot Concentrated-Winding Axial-Flux Permanent Magnet Machine with Core-Wound Coils
    De Donato, G.
    Capponi, F. Giulii
    Caricchi, F.
    2010 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION, 2010, : 1066 - 1073
  • [5] High Torque Density Fractional-Slot Concentrated-Winding Axial-Flux Permanent-Magnet Machine With Modular SMC Stator
    Geng, Weiwei
    Zhang, Zhuoran
    Li, Qiang
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2020, 56 (04) : 3691 - 3699
  • [6] High Torque Density Fractional-Slot Concentrated-Winding Axial-Flux Permanent-Magnet Machine with Modular SMC Stator
    Geng, Weiwei
    Zhang, Zhuoran
    Li, Qiang
    2019 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2019, : 2991 - 2995
  • [7] Integral-Slot Versus Fractional-Slot Concentrated-Winding Axial-Flux Permanent-Magnet Machines: Comparative Design, FEA, and Experimental Tests
    De Donato, Giulio
    Capponi, Fabio Giulii
    Rivellini, Giovanni Antonio
    Caricchi, Federico
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2012, 48 (05) : 1487 - 1495
  • [8] Quantitative Comparison for Fractional-Slot Concentrated-Winding Configurations of Permanent-Magnet Vernier Machines
    Yang, Junqin
    Liu, Guohai
    Zhao, Wenxiang
    Chen, Qian
    Jiang, Yicheng
    Sun, Longgang
    Zhu, Xiaoyong
    IEEE TRANSACTIONS ON MAGNETICS, 2013, 49 (07) : 3826 - 3829
  • [9] Integer-Slot vs Fractional-Slot Concentrated-Winding Axial-Flux Permanent Magnet Machines: Comparative Design, FEA and Experimental Tests.
    De Donato, G.
    Capponi, F. Giulii
    Rivellini, A.
    Caricchi, F.
    2011 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2011, : 3120 - 3127
  • [10] Design and Analysis of Fractional-Slot Concentrated-Winding Permanent Magnet Machine for Wind Power Generation
    Wang, Xiuping
    Qu, Chunyu
    Xu, Xiaofeng
    Wang, Dongrui
    MECHANICAL COMPONENTS AND CONTROL ENGINEERING III, 2014, 668-669 : 611 - 614
12345