The properties of epoxy resin coated silica fillers composites

被引:63
|
作者
Teh, P. L.
Mariatti, M.
Akil, H. M.
Yeoh, C. K.
Seetharamu, K. N.
Wagiman, A. N. R.
Beh, K. S.
机构
[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, Perai 14300, Pulau Pinang, Malaysia
[2] MS Ramaiah Sch Adv Studies, Bangalore 560054, Karnataka, India
[3] Intel Technol Sdn Bhd, Assembly Technol Dev, Bayan Lepas 11900, Pulau Pinang, Malaysia
关键词
epoxy; polymer; ceramic filler; electronic packaging;
D O I
10.1016/j.matlet.2006.08.036
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Epoxy resin coated silica fillers composites with high percentage of filler loading, such as 80 to 95 vol.% are able to be produced by a mechanical mixing technique. The advantages of high filler loading of theses materials are noted from the thermal and flexural modulus. Apparently, the materials exhibit low coefficient of thermal expansion (CTE) at as low as or below 10 ppm/degrees C and high flexural modulus of above 20 GPa. In general, these promising characteristics fulfill the requirement to be used as substrate materials in electronic packaging applications. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码:2156 / 2158
页数:3
相关论文
共 50 条
  • [1] Effect of Silica Fillers on Mechanical Properties of Epoxy/Kenaf Composites
    Jaafar, C. N. A.
    Zainol, I
    Aremu, O. O.
    REGIONAL CONFERENCE ON MATERIALS AND ASEAN MICROSCOPY CONFERENCE 2017 (RCM & AMC 2017), 2018, 1082
  • [2] ADSORPTION OF AN EPOXY-RESIN ON SILICA FILLERS
    TULBOVIC.BI
    PRIIMAK, EI
    RUSSIAN JOURNAL OF PHYSICAL CHEMISTRY,USSR, 1969, 43 (04): : 530 - &
  • [3] Influence of natural fillers on the thermal and mechanical properties of epoxy resin composites
    Mlynarczyk, Karolina
    Longwic, Filip
    Podkoscielna, Beata
    Klepka, Tomasz
    POLIMERY, 2022, 67 (03) : 102 - 109
  • [4] Microwave response properties of epoxy resin composites filled with graphitic fillers
    Bellucci, S.
    Bistarelli, S.
    Cataldo, A.
    Micciulla, F.
    Macutkevic, J.
    Kranauskaite, I.
    Banys, J.
    Kuzhir, P.
    Volynets, N.
    Paddubskaya, A.
    Bychanok, D.
    Maksimenko, S.
    Fierro, V.
    Celzard, A.
    2014 INTERNATIONAL CONFERENCE ON NUMERICAL ELECTROMAGNETIC MODELING AND OPTIMIZATION FOR RF, MICROWAVE, AND TERAHERTZ APPLICATIONS (NEMO), 2014,
  • [5] Conductive Properties of Nickel Coated Graphite / Epoxy Resin Composites
    Zhang F.
    Wang X.
    Zhang R.
    Xu C.
    Yu D.
    Liu Q.
    Fu X.
    Huang Z.
    Hu S.
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2019, 35 (03): : 91 - 95
  • [6] Curing kinetics and thixotropic properties of epoxy resin composites with different kinds of fillers
    Liu, Fuyong
    Yu, Wenwen
    Wang, Yujue
    Shang, Renjie
    Zheng, Qiang
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 18 : 2125 - 2139
  • [7] Study of Epoxy Resin Composites Doped with Nonlinear Fillers and Its Electrical Properties
    Wang, Xilin
    Guo, Juyi
    Yao, Youwei
    Jia, Zhidong
    Lv, Qishen
    Huang, Ronghui
    2017 IEEE CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENON (CEIDP), 2017, : 54 - 57
  • [8] Properties of spin coated epoxy/silica thin film composites: Effect of nano- and micron-size fillers
    Foo, Evon
    Jaafar, Mariatti
    Aziz, Azizan
    Sim, Lim Chong
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (10) : 1432 - 1437
  • [9] Synergistic Effect of Nano-silica and Micro-silica Fillers on the Rheological Properties of Epoxy Resin
    Khanum, Khadija Kanwal
    Kostalas, Andreas
    Jayaram, Shesha
    Ulcar, John
    2020 IEEE INDUSTRY APPLICATIONS SOCIETY ANNUAL MEETING, 2020,
  • [10] Study of heat of reaction between plasma-polymer-coated silica fillers and biphenyl epoxy resin
    Kim, N.I.
    Kang, H.M.
    Yoon, T.H.
    Journal of Adhesion Science and Technology, 2004, 18 (12): : 1325 - 1338