EMI Filter Design for High Switching Frequency Three-Phase/Level PWM Rectifier Systems

The actual attenuation characteristic of EMI filters in practice often differs from theoretical predictions and minor changes could result in a significant performance improvement. Whereas the performance of the differential-mode (DM) filter stage usually can be well predicted, the common-mode (CM) behavior is more difficult to handle. This is especially true for three-phase PWM rectifier systems, which show a large high-frequency CM voltage at the rectifier output. In this work the possible CM noise current paths of a three-phase/level PWM rectifier are analyzed where parasitic capacitances to the heat sink and to earth are considered. Additionally, a concept to significantly reduce CM emissions is discussed in detail. Based on the proposed models an EMI filter design for a system with 1 MHz switching frequency is shown. Experimental verification of the designed EMI filter is presented by impedance and conducted emission (CE) measurements taken from a 10 kW hardware prototype. Several practical aspects of filter realization like component arrangement, shielding layers, magnetic coupling etc. are discussed and verified by measurements.