Thermal Shock-Resistance Performance of Al2TiO5/Al2O3 Composites

被引:3
|
作者
Hu, Yong [1 ]
Li, Mingzhong [2 ]
Shen, Qiang [2 ]
Xu, Weiping [1 ]
机构
[1] Nanchang HangKong Univ, Dept Aeronaut & Mech Technol, Nanchang 330063, Peoples R China
[2] Wuhan Univ Technol, State Key Lab Adv Technol Mat Synth & Proc, Wuhan 430070, Peoples R China
关键词
Al2O3; Al2TiO5; composites; thermal shock resistance; ALUMINUM TITANATE CERAMICS;
D O I
10.4028/www.scientific.net/AMR.66.108
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In the present paper, Al2TiO5-Al2O3 composites with 10, 20, 40, 60, 80, and 90 Vol % of Al2O3 respectively were prepared by the sintering of Al2TiO5 and Al2O3 powers. The thermal expansion ratio was measured and the quenching-strength method was used to study the thermal shock-resistance performance. The thermal expansion ratio was found to increase from zero for the sample with 10-20Vol.%Al2O3 to that of 0.007% as the content of Al2O3 increased. The results of quenching-strength test showed that the residual strength of Al2TiO5-Al2O3 composites decreased with increasing of Al2O3 content and the thermal shock cycles. The Al2TiO5/Al2O3 composite with 20Vol % Al2O3 remained a strength of 33.4MPa after three cycles and exhibited good thermal shock-resistance performance.
引用
收藏
页码:108 / +
页数:2
相关论文
共 50 条
  • [1] Fabrication and thermal properties of Al2TiO5/Al2O3 composites
    Li, M.
    Chen, F.
    Shen, Q.
    Zhang, L.
    [J]. MATERIALS SCIENCE-POLAND, 2010, 28 (03): : 663 - 670
  • [2] Erosion Resistance of Al2TiO5/Al2O3 Composites to Molten Aluminum
    Li, Mingzhong
    Hu, Yong
    Chen, Fei
    Shen, Qiang
    Zhang, Lianmeng
    [J]. ADVANCED SYNTHESIS AND PROCESSING TECHNOLOGY FOR MATERIALS, 2009, 66 : 93 - 95
  • [3] Fabrication and thermal properties of Al2TiO5/Al 2O3 composites
    Li, M.
    Chen, F.
    Shen, Q.
    Zhang, L.
    [J]. Materials Science- Poland, 2010, 28 (03): : 663 - 670
  • [4] Nanoindentation of Al2O3/Al2TiO5 composites: Small-scale mechanical properties of Al2TiO5 as reinforcement phase
    Botero, C. A.
    Jimenez-Pique, E.
    Baudin, C.
    Salan, N.
    Llanes, L.
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (14) : 3723 - 3731
  • [5] STUDY OF THE RESISTANCE TO DEGRADATION OF Al2O3/Al2TiO5 COMPOSITES FOR POSSIBLE USE AS BONE TISSUE
    Refugio-Garcia, Elizabeth
    Vazquez-Huerta, Gerardo
    Arce-Aguilera, Fernando
    Herrera-Hernandez, Hector
    Osorio-Ramos, Jessica
    Miranda-Hernandez, Jose G.
    Rodriguez-Garcia, Jose A.
    Rocha-Rangel, Enrique
    [J]. CHEMISTRY & CHEMICAL TECHNOLOGY, 2022, 16 (03): : 398 - 403
  • [6] Rapid consolidation of nanophase Al2O3 and an Al2O3/Al2TiO5 composite
    West, DA
    Mishra, RS
    Mukherjee, AK
    [J]. NANOPHASE AND NANOCOMPOSITE MATERIALS II, 1997, 457 : 347 - 355
  • [7] Design and preparation of Al2TiO5/Al2O3 FGM
    Zhang, LM
    Shen, Q
    Fang, Q
    Li, MZ
    [J]. FUNCTIONALLY GRADED MATERIALS VII, 2003, 423-4 : 187 - 190
  • [8] Effect of MgTi2O5 addition on thermal shock resistance of Al2TiO5
    Shen, Q
    Hu, Y
    Wang, CB
    Li, MZ
    Zhang, LM
    [J]. HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 1187 - 1190
  • [9] Modification of YSZ fiber composites by Al2TiO5 fibers for high thermal shock resistance
    Liu, Wei
    Xie, Yongshuai
    Deng, Zhezhe
    Peng, Ying
    Dong, Jianhong
    Zhu, Ze
    Ma, Dehua
    Zhu, Luyi
    Zhang, Guanghui
    Wang, Xinqiang
    [J]. JOURNAL OF ADVANCED CERAMICS, 2022, 11 (06) : 922 - 934
  • [10] Synthesis and properties of in situ Al2TiO5/Al2O3 composite
    de Arenas, IB
    Gil, O
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 143 : 838 - 842