Finite Element Analysis on the Roll Milling Process of Twisted Oblate Tube

被引：0
|
作者：
Yang, Sheng [1 ]
Zhang, Li [1 ]
Xu, Hong [1 ]
Zhao, Liwei [1 ]
机构：
[1] E China Univ Sci & Technol, Sch Mech & Power Engn, State Key Lab Chem Engn, Shanghai 200237, Peoples R China
来源：
MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5 | 2010年 / 97-101卷
关键词：
Twisted oblate tube; Forming process; Roll milling; LS-DYNA; Simulation;
D O I：
10.4028/www.scientific.net/AMR.97-101.3065
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The roll milling process for manufacturing a twisted oblate tube was presented and applied in the forming of twisted oblate copper tube successfully. A finite element simulation of the roll milling process for forming a twisted oblate 1010 steel tube was implemented on the basis of the elastic-plastic explicit dynamic finite element method under the ANSYS/LS-DYNA environment. The simulation accuracy was verified by comparing the forming force from simulation with the experimental results. The forming effect, change curve of forming force, tube stress distribution and influences of forming parameters on forming force were investigated. The simulation results can be guidance to the manufacturing process improvement and manufacturing equipment design of the twisted oblate steel tube.
引用
收藏
页码：3065 / 3069
页数：5
相关论文
共 50 条
  • [1] Study on milling process based on finite element analysis
    Zhang, Yongliang
    Wang, Ruijie
    Liu, Hongbin
    Du, Maohua
    Xu, Xiaodong
    [J]. AUTOMATION EQUIPMENT AND SYSTEMS, PTS 1-4, 2012, 468-471 : 1322 - 1325
  • [2] Finite element analysis of roll forming process for AZ31B magnesium alloy tube
    Han, S-S.
    Lee, M-Y.
    [J]. MATERIALS RESEARCH INNOVATIONS, 2011, 15 : S270 - S273
  • [3] Finite element analysis and optimization of tube hydroforming process
    Raut, Shreedhar Vinayak
    Ramesh, Ajith
    Arun, A.
    Sumesh, C. S.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 5008 - 5016
  • [4] Finite element analysis of laser tube bending process
    Hao, N
    Li, L
    [J]. APPLIED SURFACE SCIENCE, 2003, 208 : 437 - 441
  • [5] Tube drawing process modelling by a finite element analysis
    Palengat, M.
    Chagnon, G.
    Millet, C.
    Favier, D.
    [J]. NUMIFORM '07: MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS I AND II, 2007, 908 : 705 - +
  • [6] Tube Drawing Process Modelling By A Finite Element Analysis
    Palengat, M.
    Guiraud, O.
    Millet, C.
    Chagnon, G.
    Favier, D.
    [J]. MEDICAL DEVICE MATERIALS IV, 2008, : 65 - +
  • [7] The Finite Element Simulation and Analysis of Polymer Tube Coextrusion Process
    Zhang, Min
    Yuan, Guoqiang
    Sun, Sheng
    Jia, Yuxi
    [J]. ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 1250 - +
  • [8] Analysis and finite element simulation of the tube bulge hydroforming process
    Hwang, YM
    Lin, YK
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 125 : 821 - 825
  • [9] Analysis and finite element simulation of the tube bulge hydroforming process
    B. Yang
    W.G. Zhang
    S.H. Li
    [J]. The International Journal of Advanced Manufacturing Technology, 2006, 29 : 453 - 458
  • [10] Tube bulge process : Theoretical analysis and finite element simulations
    Velasco, Raphael
    Boudeau, Nathahe
    [J]. NUMIFORM '07: MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS I AND II, 2007, 908 : 1281 - +
12345