Real-time cutting force induced error compensation on a turning center

被引：43
|
作者：
Yang, S [1 ]
Yuan, J [1 ]
Ni, J [1 ]
机构：
[1] KYUNGPOOK NATL UNIV,DEPT MECH ENGN,TAEGU,SOUTH KOREA
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1997年 / 37卷 / 11期
关键词：
D O I：
10.1016/S0890-6955(97)00028-X
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A real-time error compensation system has been developed to reduce the cutting force induced planar error of a two-axis turning center by using sensing, metrology, modeling, and computer control techniques. Ten error components are formulated as a two-dimensional error field. A piezoelectric force sensor mounted in the pocket under the tool turret is used to characterize the cutting forces. A compensation controller based on an IBM/PC has been linked with the existing computer numerical controller (CNC) to correct machine errors in real time. Three different types of cutting tests were performed and the results showed that the maximum diameter error in the workpiece was reduced by 67-85% using this compensation system. (C) 1997 Elsevier Science Ltd.
引用
收藏
页码：1597 / 1610
页数：14
相关论文
共 50 条
  • [1] Real-time cutting force induced error compensation on a turning center
    Kyungpopk Natl Univ
    [J]. Int J Mach Tools Manuf, 11 (1597-1610):
  • [2] Modeling and real-time compensation of cutting force-induced errors on NC turning center
    Wu, H.
    Turyagyenda, G.
    Yang, J. G.
    [J]. ADVANCES IN MACHINING & MANUFACTURING TECHNOLOGY VIII, 2006, 315-316 : 274 - 278
  • [3] AN APPLICATION OF REAL-TIME ERROR COMPENSATION ON A TURNING CENTER
    LO, CH
    YUAN, JX
    NI, J
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1995, 35 (12): : 1669 - 1682
  • [4] Application of Real-time Compensation of Cutting Force Induced Error on CNC Machine Tools
    Ren, Chenggao
    Shen, Xiaolong
    [J]. PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ELECTRONIC & MECHANICAL ENGINEERING AND INFORMATION TECHNOLOGY (EMEIT-2012), 2012, 23
  • [5] Thermal error optimization modeling and real-time compensation on a CNC turning center
    Hao, Wu
    Zhang Hongtao
    Guo Qianjian
    Wang Xiushan
    Yang Jianguo
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 207 (1-3) : 172 - 179
  • [6] Synthetically modeling for the thermal error and cutting force induced error on a CNC turning center
    Wu, Hao
    Yang, Jian-Guo
    Zhang, Hong-Tao
    [J]. Sichuan Daxue Xuebao (Gongcheng Kexue Ban)/Journal of Sichuan University (Engineering Science Edition), 2008, 40 (02): : 165 - 169
  • [7] Modelling and real-time compensation of cutting-force-induced error on a numerical control twin-spindle lathe
    Wu, H.
    Chen, H. J.
    Meng, P.
    Yang, J. G.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2010, 224 (B4) : 567 - 577
  • [8] Real-time positioning error compensation for a turning machine using neural network
    Vinod, Prakash
    Reddy, Narendra T.
    Sajin, S.
    Kumar, Shashi P., V
    Narendranath, S.
    [J]. INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 2293 - 2300
  • [9] Real-time compensation method for the geometric and thermal error on CNC turning machine
    School of Mechanical Eng., Shanghai Jiaotong Univ., Shanghai 200240, China
    [J]. Sichuan Daxue Xuebao (Gongcheng Kexue Ban), 2008, 1 (163-166): : 163 - 166
  • [10] Accuracy enhancement of a horizontal machining center by real-time error compensation
    Yang, S
    Yuan, J
    Ni, J
    [J]. JOURNAL OF MANUFACTURING SYSTEMS, 1996, 15 (02) : 113 - 124
12345