High-safety composite solid electrolyte based on inorganic matrix for solid-state lithium-metal batteries

Composite solid electrolytes (CSEs) combine the advantages of polymer electrolytes and inorganic ceramic electrolytes, which have attracted increasing attention for solid-state lithium-metal batteries. However, the most studied polymer-based CSEs are easily ignited and can be penetrated by lithium (Li) dendrite, leading to safety issue. Herein, we report CSEs with very high inorganic ceramic loadings of > 90% by a cold sintering method at a low temperature of 200 & DEG;C. The ceramic-based CSEs show better safety and mechanical properties than polymer-based CSEs. The Li symmetric cell-symmetric Li-ion cells have the same material as the positive and negative electrode [when cells are assembled one would already contain lithium and the other would not]-using the ceramic-based CSE delivers a stable cycling performance of over 550 h at the current density of 0.3 mA/cm(2). More importantly, according to the electrochemical impedance spectroscopy (EIS), Debye diagram, and power law equation, the Li-ion conduction mechanism in CSEs is systematically investigated. Using a modified brick layer model, the conductivities for Li-ions transport parallel with ceramic/polymer interfaces are calculated to be five orders of magnitudes higher than that perpendicular to the interfaces. This work provides a new analytical method for inorganic matrix based CSEs for high-safety batteries and conducts an in-depth research on the ion conduction mechanism. (c) 2022 Elsevier Ltd. All rights reserved.