A Grid-Interactive Permanent-Magnet Synchronous Motor-Driven Solar Water-Pumping System

This paper deals with an effective power transfer scheme between the solar photovoltaic (PV) array and single-phase grid, feeding a field-oriented-controlled (FOC) permanent-magnet synchronous motor (PMSM) drive applied to a water-pumping system (WPS). Owing to the intermittency associated with solar (PV) system, the requirement of constant water supply is not possible with the standalone system. In order to mitigate this, a grid-intergraded WPS is proposed here. The grid integration enables the consumer an uninterrupted operation of water pump irrespective of solar insulation level. Moreover, the PV power can he fed to the utility grid when water pumping is not required. To make it possible, one voltage-source converter (VSC) and one voltage-source inverter connected to a common dc link are used for utility grid and PMSM control, respectively. The unit vector template theory is utilized to generate switching pulses for VSC to control the bidirectional power flow between the solar PV system and utility grid through the common dc link. A sensorless FOC is used to drive the PMSM coupled to the water pump. An intermediate stage boost converter is used for extracting optimum power from solar PV array under variable insolation. A perturb and observe algorithm is used for generating the duty ratio for the maximum power point (MPP) operation. The applicability of overall system constituting utility grid in conjugation with PV array fed PMSM-coupled water pump ensuring bidirectional power flow control with MPP tracking of PV array and abiding the utility grid, IEEE-519 standard for power factor, and total harmonic distortion is simulated in MATLAB/Simulink environment with SimPowerSystem toolbox and validated on a prototype developed in the laboratory. The system prototype is tested under variable solar insolation and grid abnormalities such as voltage sag and voltage swell.