Effect of the fluorination of DLC film on the corrosion protection of aluminum alloy (AA 5052)

被引:22
|
作者
Rangel, R. C. C. [1 ]
Souza, M. E. P. [1 ]
Schreiner, W. H. [2 ]
Freire, C. M. A. [3 ]
Rangel, E. C. [1 ]
Cruz, N. C. [1 ]
机构
[1] Univ Estadual Paulista, Lab Technol Plasmas, Sorocaba, SP, Brazil
[2] Univ Fed Parana, Dept Phys, BR-80060000 Curitiba, Parana, Brazil
[3] Univ Estadual Campinas, Dept Mat Engn, Campinas, SP, Brazil
来源
SURFACE & COATINGS TECHNOLOGY | 2010年 / 204卷 / 18-19期
关键词
Fluorinated amorphous carbon; Thin films; PIIID corrosion resistance; AMORPHOUS-CARBON; ION-IMPLANTATION; SURFACE; DEPOSITION;
D O I
10.1016/j.surfcoat.2010.03.055
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
It is presented a study conducted on the physical and electrochemical properties of fluorinated a-C:H films deposited onto a commercial aluminum alloy (AA 5052). The coatings were deposited from mixtures of 91% of acetylene and 9% of argon by plasma immersion ion implantation and deposition technique, PIIID. Total gas pressure was 44 Pa and deposition time (t(dep)) was varied from 300 to 1200 s. The depositing plasmas were generated by the application of radiofrequency power (13.56 MHz, 100W) to the upper electrode and high voltage negative pulses (2400 V. 300 Hz) to the sample holder. Fluorine was incorporated in a post-deposition plasma treatment (13.56 MHz, 70W, 13 Pa) generated from sulfur hexafluoride atmosphere. Chemical structure and composition of the films were investigated using infrared reflectance/absorbance spectroscopy and X-ray photoelectron spectroscopy. The corrosion resistance of the layers was determined by electrochemical impedance spectroscopy (EIS) in a 3.5% NaCl solution, at room temperature. Films presented good adhesion to the substrates and are classified as hydrogenated amorphous carbon (a-C:H) with oxygen traces. Fluorine was detected in all the samples after the post-deposition treatment being its proportion independent on the deposition time. Film thickness presented different tendencies with t(dep), revealing the variation of the deposition rate as a function of the deposition time. Such fluorinated a-C:H films improved the corrosion resistance of the aluminum surface. In a general way the corrosion resistance was higher for films prepared with lower deposition times. The variation of sample temperature with t(dep) was found to be decisive for the concentration of defects in the films and, consequently, for the performance of the samples in electrochemical tests. Results are interpreted in terms of the energy delivered to the growing layer by ionic bombardment. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码:3022 / 3028
页数:7
相关论文
共 50 条
  • [1] Effect of temperature on the anodizing process of aluminum alloy AA 5052
    Theohari, S.
    Kontogeorgou, Ch.
    APPLIED SURFACE SCIENCE, 2013, 284 : 611 - 618
  • [2] Monitoring for pitting corrosion of aluminum alloy 5052
    Seri, Osami
    Ohtani, Naomichi
    Tagashira, Khosuke
    1600, (38):
  • [3] PITTING CORROSION OF 5052 ALUMINUM-ALLOY
    LOCKWOOD, F
    LEE, S
    FAUNCE, J
    GREEN, JAS
    PTASHNICK, WJ
    APPLICATIONS OF SURFACE SCIENCE, 1985, 20 (03): : 339 - 346
  • [4] Alumoxane film for corrosion protection of 2024 aluminum alloy
    Vejar, Nelson
    Rojas, Javier
    Alvarado, Claudia
    Solis, Roberto
    Pineda, Fabiola
    Sancy, Mamie
    Munoz, Lisa
    Paez, Maritza
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 4942 - 4956
  • [5] Superhydrophobic Surfaces on 5052 Aluminum Alloy Obtained from LDH Film Modified with Stearic Acid for Enhanced Corrosion Protection
    Collasius Malta, Maria Isabel
    Santos Vieira, Magda Rosangela
    Casanova da Silva, Rafael Gleymir
    Carneiro da Silva, Leonardo Mendonca
    de Araujo, Edval Goncalves
    De Oliveira Maciel, Sara Horacio
    Urtiga Filho, Severino Leopoldino
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2019, 22 (06):
  • [6] CATIONIC FILM-FORMING INHIBITORS FOR THE CORROSION PROTECTION OF AA 7075 ALUMINUM-ALLOY IN CHLORIDE SOLUTIONS
    ARNOTT, DR
    HINTON, BRW
    RYAN, NE
    MATERIALS PERFORMANCE, 1987, 26 (08) : 42 - 47
  • [7] Corrosion protection of DLC coatings on magnesium alloy
    Choi, J.
    Nakao, S.
    Kim, J.
    Ikeyama, M.
    Kato, T.
    DIAMOND AND RELATED MATERIALS, 2007, 16 (4-7) : 1361 - 1364
  • [8] Effect of Bias Voltage on Characteristics of Multilayer Si-DLC Film Coated on AA6061 Aluminum Alloy
    Saad M. Fayed
    Dongxu Chen
    Shengli Li
    Yanwen Zhou
    Hongbin Wang
    Journal of Materials Engineering and Performance, 2021, 30 : 743 - 759
  • [9] Effect of Bias Voltage on Characteristics of Multilayer Si-DLC Film Coated on AA6061 Aluminum Alloy
    Fayed, Saad M.
    Chen, Dongxu
    Li, Shengli
    Zhou, Yanwen
    Wang, Hongbin
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (01) : 743 - 759
  • [10] A self-curing konjac glucomannan/CaCO3 coating for corrosion protection of AA5052 aluminum alloy in NaCl solution
    Zhang, Kegui
    Yang, Wenzhong
    Ge, Feng
    Xu, Bin
    Chen, Yun
    Yin, Xiaoshuang
    Liu, Ying
    Zuo, Huanzhen
    INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2020, 151 : 691 - 701