Flatwise compression and flexural behavior of foam core and polymer pin-reinforced foam core composite sandwich panels

被引:47
|
作者
Abdi, B. [1 ]
Azwan, S. [1 ]
Abdullah, M. R. [1 ]
Ayob, Amran [1 ]
Yahya, Yazid [1 ]
Xin, Li [1 ]
机构
[1] Univ Teknol Malaysia, Ctr Composites, Johor Baharu 81310, Johor, Malaysia
关键词
Loading rate; Flexural; Flatwise compression; Sandwich panel; Polymer pins; FACE-SHEETS; BEAMS; COLLAPSE; THICKNESS;
D O I
10.1016/j.ijmecsci.2014.08.004
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The behavior of foam core sandwich (FCS) and polymer pin-reinforced foam core sandwich (PRFCS) panels was experimentally explored for flatwise compression and flexural loadings. The FCS and PRFCS panels were made of chopped strand mat glass/polyester as face sheets and polyurethane foam as core material using a vacuum infusion process. The aim of the study is to determine the effect of the polyester pin reinforcement in the foam core when the panels are subjected to flexural and flatwise compression loadings. Moreover, the effects of different loading rates on the flexural response of glass/polyester laminate and both types of the sandwich panels were determined. It was found that by reinforcing the foam core with cylindrical polymer pins, the flatwise compression and flexural properties of panels were increased significantly. Furthurmore, it was found that the diameter of polymer pins had a large influence while the loading rate had a moderate influence on the flexural stiffness of both types of the composite sandwich panels. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:138 / 144
页数:7
相关论文
共 50 条
  • [1] Free vibration analysis of polymer pin-reinforced foam core sandwich composite panels
    Shishir, Md Asif Rezwan
    Zhang, Zhaoyuan
    Cai, Deng'an
    Wang, Xinwei
    Xu, Qinghua
    [J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2023, 42 (3-4) : 163 - 176
  • [2] Comparison of Foam Core Sandwich Panel and Through-Thickness Polymer Pin-Reinforced Foam Core Sandwich Panel Subject to Indentation and Flatwise Compression Loadings
    Abdi, B.
    Azwan, S.
    Abdullah, M. R.
    Ayob, Amran
    Yahya, Yazid
    [J]. POLYMER COMPOSITES, 2016, 37 (02) : 612 - 619
  • [3] Evaluation of sandwich panels with composite tube-reinforced foam core under bending and flatwise compression
    Cinar, Kenan
    [J]. JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2020, 22 (02) : 480 - 493
  • [4] Compression and low velocity impact response of sandwich panels with polyester pin-reinforced foam filled honeycomb core
    Jayaram, R. S.
    Nagarajan, V. A.
    Kumar, K. P. Vinod
    [J]. JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2019, 21 (06) : 2014 - 2030
  • [5] Mechanical Behaviour of Pin-Reinforced Foam Core Sandwich Panels Subjected to Low Impact Loading
    Nejad, Ali Farokhi
    Koloor, Seyed Saeid Rahimian
    Hamzah, Syed Mohd Saiful Azwan Syed
    Yahya, Mohd Yazid
    [J]. POLYMERS, 2021, 13 (21)
  • [6] Compression after impact behavior of composite foam-core sandwich panels
    Bai, Ruixiang
    Guo, Jingjing
    Lei, Zhenkun
    Liu, Da
    Ma, Yu
    Yan, Cheng
    [J]. COMPOSITE STRUCTURES, 2019, 225
  • [7] Mechanical performance of polyester pin-reinforced foam filled honeycomb sandwich panels
    Jayaram, R. S.
    Nagarajan, V. A.
    Kumar, K. P. Vinod
    [J]. SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2018, 25 (04) : 797 - 805
  • [8] Study on the Microstructure and Compression of Composite Metal Foam Core Sandwich Panels
    Marx, Jacob
    Rabiei, Afsaneh
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (10): : 5187 - 5197
  • [9] Study on the Microstructure and Compression of Composite Metal Foam Core Sandwich Panels
    Jacob Marx
    Afsaneh Rabiei
    [J]. Metallurgical and Materials Transactions A, 2020, 51 : 5187 - 5197
  • [10] Flexural behavior of sandwich panels with cellular wood, plywood stiffener/foam and thermoplastic composite core
    Labans, Edgars
    Kalnins, Kaspars
    Bisagni, Chiara
    [J]. JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2019, 21 (02) : 784 - 805