A calculation method of sliding friction coefficient on tooth surface for helical gear pair based on loaded tooth contact analysis and elastohydrodynamic lubrication theory

被引：7
|
作者：
Wang, Cheng [1 ]
Ken, Mao [2 ]
机构：
[1] Univ Jinan, Sch Mech Engn, Jinan 250022, Peoples R China
[2] Univ Warwick, Ken Mao B Sch Engn, Coventry, W Midlands, England
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY | 2021年 / 235卷 / 08期
关键词：
Sliding friction coefficient; helical gear; LTCA; EHL; non-Newtonian fluid; POWER LOSSES; PREDICTION; EFFICIENCY; WEAR;
D O I：
10.1177/1350650120966894
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The sliding friction coefficient on tooth surface is related to power loss, carry capacity and transmission performance of gear. Reasonable transmission analysis of gear pair is the premise of accurate calculation of sliding friction coefficient on tooth surface. However, for helical gear pair, the line contact without considering machining error/installation error/modification of gear is usually adopted to replace the major axis of ellipse caused by contact load. Therefore, in this paper, contact path on tooth surface, length of contact line, load distribution on tooth surface and loaded transmission errors are accurately calculated by loaded tooth contact analysis (LTCA). Combing with elastohydrodynamic lubrication (EHL) theory, a calculation method of sliding friction coefficient on tooth surface for helical gear pair is proposed.
引用
收藏
页码：1551 / 1560
页数：10
相关论文
共 50 条
  • [1] Vibration-Based Fault Diagnosis of Helical Gear Pair With Tooth Surface Wear Considering Time-Varying Friction Coefficient Under Mixed Elastohydrodynamic Lubrication Condition
    Wang, Siyu
    Zhu, Rupeng
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2022, 144 (07):
  • [2] Dynamic model of a helical gear pair considering tooth surface friction
    Wang, Cheng
    JOURNAL OF VIBRATION AND CONTROL, 2020, 26 (15-16) : 1356 - 1366
  • [3] Lubricated loaded tooth contact analysis for spur gear pair
    Oglieve C.
    Sivayogan G.
    Mohammadpour M.
    Rahnejat H.
    International Journal of Powertrains, 2019, 8 (01): : 23 - 38
  • [4] A dynamic calculation method of sliding friction losses for a helical gear pair
    Cheng Wang
    Zhaoyao Shi
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39 : 1521 - 1528
  • [5] A dynamic calculation method of sliding friction losses for a helical gear pair
    Wang, Cheng
    Shi, Zhaoyao
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2017, 39 (05) : 1521 - 1528
  • [6] Effects of gear dimensions and tooth surface modifications on the loaded transmission error of a helical gear pair
    Umeyama, M
    Kato, M
    Inoue, K
    JOURNAL OF MECHANICAL DESIGN, 1998, 120 (01) : 119 - 125
  • [7] Loaded tooth contact analysis of curve-face gear pair
    Lin, Chao
    He, Chunjiang
    Gu, Si-jia
    Wu, Xiao-yong
    ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (10):
  • [8] Effects of gear dimensions and tooth surface modifications on the loaded transmission error of a helical gear pair
    Toyota Motor Corp, Sizuoka, Japan
    J Mech Des, Trans ASME, 1 (119-125):
  • [9] Calculation and comparative analysis of helical gear tooth contact dynamic stress
    Jia, Hai-Tao
    Wang, Feng
    Fang, Zong-De
    Zhendong yu Chongji/Journal of Vibration and Shock, 2014, 33 (22): : 168 - 171
  • [10] Complex geometric modeling and tooth contact analysis of a helical face gear pair with arc-tooth
    Mo Shuai
    Song Wen-hao
    Zhu Sheng-ping
    Feng Zhi-you
    Tang Wen-jie
    Gao Han-jun
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2022, 29 (04) : 1213 - 1225
12345