Effect of Impurity Fe Concentration on the Corrosion Behavior of Mg-14 mass%Li-1 mass%Al Alloy

被引：12
|
作者：
Morishige, Taiki [1 ]
Ueno, Kumiko [1 ]
Okano, Masahiro [2 ]
Goto, Takayuki [3 ]
Nakamura, Eiji [3 ]
Takenaka, Toshihide [1 ]
机构：
[1] Kansai Univ, Dept Chem & Mat Engn, Suita, Osaka 5648680, Japan
[2] Kansai Univ, Grad Sch Sci & Engn, Suita, Osaka 5648680, Japan
[3] Santoku Corp, Kobe, Hyogo 6580013, Japan
来源：
MATERIALS TRANSACTIONS | 2014年 / 55卷 / 09期
关键词：
magnesium-lithium alloy; corrosion rate; impurity; exfoliation corrosion; MAGNESIUM;
D O I：
10.2320/matertrans.MAW201405
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Mg-Li system alloys with over 11 mass% Li have an excellent cold-workability in Mg alloys due to the bcc-structured crystal system. However this system alloys have poor corrosion resistance caused by Li solid-solution alloy. The corrosion resistance of conventional hcp-Mg alloys is influenced by the composition of impurity elements. Particularly, minute iron element deteriorates the corrosion resistance of Mg alloy and there is a threshold concentration on the corrosion rate in Mg alloys. In this study, the effect of iron element on the corrosion resistance of Mg-Li alloy was investigated by addition of iron. The corrosion resistance of Mg-Li with no Fe addition was higher than conventional Mg alloy. The corrosion rate of Mg-Li alloy increased with increasing iron concentration. However, there is no threshold iron concentration affected to the corrosion resistance on Mg-Li alloy.
引用
收藏
页码：1506 / 1509
页数：4
相关论文
共 50 条
  • [1] Exfoliation Corrosion Behavior of Cold-Rolled Mg-14 mass% Li-1 mass% Al Alloy in NaCl Solution
    Morishige, Taiki
    Doi, Hirokazu
    Goto, Takayuki
    Nakamura, Eiji
    Takenaka, Toshihide
    MATERIALS TRANSACTIONS, 2013, 54 (09) : 1863 - 1866
  • [2] Effect of Al Composition on the Corrosion Resistance of Mg-14 mass% Li System Alloy
    Morishige, Taiki
    Obata, Yutaro
    Goto, Takayuki
    Fukagawa, Tomoki
    Nakamura, Eiji
    Takenaka, Toshihide
    MATERIALS TRANSACTIONS, 2016, 57 (10) : 1853 - 1856
  • [3] Cold-rolled Mg-14 mass % Li-1 mass % Al alloy and its friction stir welding
    Tsujikawa, Masato
    Abe, Yukiko
    Chung, S. W.
    Oki, Sachio
    Higashi, Kenji
    Hiraki, Isao
    Kamita, Masaichiro
    MATERIALS TRANSACTIONS, 2006, 47 (04) : 1077 - 1081
  • [4] Cold-rolled Mg-14 mass% Li-1 mass% Al alloy and its friction stir welding
    Department of Materials Science, Graduate School of Engineering, Osaka Prefecture University, Sakai 599-8531, Japan
    不详
    不详
    不详
    不详
    不详
    1600, 1077-1081 (April 2006):
  • [5] Microstructure evolution of Mg-14% Li-1% Al alloy during the process of equal channel angular pressing
    Liu, T.
    Wu, S. D.
    Li, S. X.
    Li, P. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 460 : 499 - 503
  • [6] Microstructure and corrosion resistance of anodized Mg-9 mass%Li-1 mass%Zn alloy
    Wang, Jian-Yih
    Liu, Chung-Ming
    Chen, Wei-Kun
    Liu, Yih-Ming
    Ger, Ming-Der
    MATERIALS TRANSACTIONS, 2008, 49 (06) : 1355 - 1358
  • [7] Characteristics and corrosion studies of vanadate conversion coating formed on Mg-14 wt%Li-1 wt%Al-0.1 wt%Ce alloy
    Ma, Yibin
    Li, Ning
    Li, Deyu
    Zhang, Milin
    Huang, Xiaomei
    APPLIED SURFACE SCIENCE, 2012, 261 : 59 - 67
  • [8] Relationship between Microstructure and Exfoliation Corrosion in Mg-14mass%Li-3mass%Al Cold-Rolled Alloy
    Sekiguchi, Yuki
    Morishige, Taiki
    Goto, Takayuki
    Nakamura, Eiji
    Takenaka, Toshihide
    THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 1743 - 1747
  • [9] CORROSION BEHAVIOR OF THE AL-LI-CU-MG ALLOY
    BRAUN, R
    BUHL, H
    ZEITSCHRIFT FUR WERKSTOFFTECHNIK-MATERIALS TECHNOLOGY AND TESTING, 1987, 18 (08): : 258 - 265
  • [10] THE CORROSION FATIGUE BEHAVIOR OF AN AL-MG-LI ALLOY
    RICKER, RE
    JOURNAL OF METALS, 1984, 36 (07): : 6 - 6
12345