Tin doping in spray pyrolysed indium sulfide thin films for solar cell applications

被引：56

作者：

Mathew, Meril ^{[1
]}

Gopinath, Manju ^{[1
]}

Kartha, C. Sudha ^{[1
]}

Vijayakumar, K. P. ^{[1
]}

Kashiwaba, Y. ^{[2
]}

Abe, T. ^{[2
]}

机构：

[1] Cochin Univ Sci & Technol, Dept Phys, Kochi 682022, India

[2] Iwate Univ, Dept Elect & Elect Engn, Morioka, Iwate 020855, Japan

来源：

SOLAR ENERGY | 2010年 / 84卷 / 06期

关键词：

Indium sulfide; Thin film solar cell; Buffer layer; Tin doping; Spray pyrolysis; BETA-IN2S3; EFFICIENCY; EVOLUTION; LAYER; VAPOR;

D O I：

10.1016/j.solener.2010.01.030

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

This paper presents studies carried out on tin-doped indium sulfide films prepared using Chemical Spray Pyrolysis (CSP) technique. Effect of both in-situ and ex-situ doping were analyzed. Ex-situ doping was done by thermal diffusion, which was realized by annealing Sn/In2S3 bilayer films. In-situ doping was accomplished by introducing Sn into the spray solution by using SnCl4.5H(2)O. Interestingly, it was noted that by ex-situ doping, conductivity of the sample enhanced considerably without affecting any of the physical properties such as crystallinity or band gap. Analysis also showed that higher percentage of doping resulted in samples with low crystallinity and negative photosensitivity. In-situ doping resulted in amorphous films. In contrast to ex-situ doping, 'in- situ doping' resulted in widening of optical band gap through oxygen incorporation; also it gave highly photosensitive films. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：888 / 897

页数：10

共 50 条

[1] Characterization of spray pyrolysed indium sulfide thin films
John, TT
Bini, S
Kashiwaba, Y
Abe, T
Yasuhiro, Y
Kartha, CS
Vijayakumar, KP
SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 2003, 18 (06) : 491 - 500
[2] STRUCTURAL, OPTICAL, AND ELECTRICAL CHARACTERIZATION OF SPRAY PYROLYSED INDIUM SULFIDE THIN FILMS
Rahman, F.
Podder, J.
Ichimura, M.
SURFACE REVIEW AND LETTERS, 2013, 20 (02)
[3] Synthesis and characterization of chemical spray pyrolysed CZTS thin films for solar cell applications
Diwate, Kiran
Mohite, Kakasaheb
Shinde, Manish
Rondiya, Sachin
Pawbake, Amit
Date, Abhijit
Pathan, Habib
Jadkar, Sandesh
1ST INTERNATIONAL CONFERENCE ON ENERGY AND POWER, ICEP2016, 2017, 110 : 180 - 187
[4] Vacuum annealed tin sulfide (SnS) thin films for solar cell applications
Hegde, S. S.
Kunjomana, A. G.
Murahari, P.
Prasad, B. K.
Ramesh, K.
SURFACES AND INTERFACES, 2018, 10 : 78 - 84
[5] Spray deposited indium doped tin oxide thin films for organic solar cell application
Mohammad, Tauheed
Kumar, Vinod
Dutta, Viresh
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES, 2020, 117
[6] Optimization Of The Deposition Parameters Of Spray Pyrolysed PbS Thin Films In Preparation Of Lead Zinc Sulphide Thin Films For Solar Cell Applications
Veena, E.
Pattanshetti, I. I.
Kavyashree
Hittalmani, A.
DAE SOLID STATE PHYSICS SYMPOSIUM 2019, 2020, 2265
[7] Influence of Deposition Temperature on Indium Tin Oxide Thin Films for Solar Cell Applications
Kanneboina, Venkanna
Basumatary, Pilik
Agarwal, Pratima
CURRENT TRENDS IN RENEWABLE AND ALTERNATE ENERGY, 2019, 2091
[8] Transparent Conductive Indium Zinc Tin Oxide Thin Films for Solar Cell Applications
Damisih
Ma, Hong Chan
Yoon, Dong Jin
Kim, Jeong-Joo
Lee, Hee Young
JOURNAL OF NANOELECTRONICS AND OPTOELECTRONICS, 2011, 6 (03) : 223 - 229
[9] Spray pyrolysed thin films of copper antimony sulfide as photovoltaic absorber
Ramos Aquino, Jose Agustin
Rodriguez Vela, Dorian Leonardo
Shaji, Sadasivan
Avellaneda Avellaneda, David
Krishnan, Bindu
PHYSICA STATUS SOLIDI C: CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 13, NO 1, 2016, 13 (01): : 24 - 29
[10] Lead-doped cubic tin sulfide thin films for solar cell applications
Chalapathi, U.
Jayasree, Y.
Park, Si-Hyun
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2022, 150

← 1 2 3 4 5 →