Measurement of odor intensity by an electronic nose

The possibility of using electronic noses (ENs) to measure odor intensity was investigated in this study. TWO commercially available ENs, an Aromascan A32S with conducting polymer sensors and an Alpha M.O.S. Fox 3000 with metal oxide sensors, as well as an experimental EN made of Taguchi-type tin oxide sensors, were used in the experiments. Odor intensity measurement by sensory analysis and EN sensor response were obtained for samples of odorous compounds (n-butanol, CH3COCH3, and C2H5SH) and for binary mixtures of odorous compounds (n-butanol and CH3COCH3). Linear regression analysis and artificial neural networks (ANN) were used to establish a relationship between odor intensity and EN sensor responses. The results suggest that large differences in sensor response to samples of equivalent odor intensity exist and that sensitivity to odorous compounds varies according to the type of sensors. A linear relationship between odor intensify and averaged sensor response was found to be appropriate for the EN based on conducting polymer sensors with a correlation coefficient (r) of 0.94 between calculated and measured odor intensity. However, the linear regression approach was shown to be inadequate for both ENs, which included metal oxide-type sensors. Very strong correlation (r = 0.99) between measured odor intensity and calculated odor intensity using the ANN developed were obtained for both commercial ENs. A weaker correlation (r = 0.84) was found for the experimental instrument, suggesting an insufficient number of sensors and/or not enough diversity in sensor responses. The results demonstrated the ability of ENs to measure odor intensity associated with simple mixtures of odorous compounds and suggest that ANN are appropriate to model the relationship between odor intensity measurement and EN sensor response.