Experimental study of low-cycle fatigue of pipe elbows with local wall thinning and life estimation using finite element analysis

被引:37
|
作者
Takahashi, Koji [1 ]
Tsunoi, Satoshi [1 ]
Hara, Takumi [1 ]
Ueno, Tomohiro [1 ]
Mikami, Akira [1 ]
Takada, Hajime [1 ]
Ando, Kotoji [1 ]
Shiratori, Masaki [1 ]
机构
[1] Yokohama Natl Univ, Fac Engn, Yokohama, Kanagawa 2408501, Japan
关键词
Wall thinning; Elbow; Low-cycle fatigue; Carbon steel pipe; Finite element analysis; FRACTURE-BEHAVIOR;
D O I
10.1016/j.ijpvp.2010.03.022
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Low-cycle fatigue tests were conducted using elbow specimens with local wall thinning Local wall thinning was machined on the inside of the elbow in order to simulate metal loss from erosion corrosion The local wall thinning was located in three different areas known as the extrados, crown and intrados. The elbow specimens were subjected to cyclic in-plane bending under displacement control without internal pressure In addition, three-dimensional elastic-plastic analyses were also carried out using the finite element method As a result, the crack penetration area and the crack growth direction were successfully predicted by the analyses. The fatigue lives estimated by the analyses were close to those obtained by the experiments. (C) 2010 Elsevier Ltd. All rights reserved
引用
收藏
页码:211 / 219
页数:9
相关论文
共 50 条
  • [1] Low Cycle Fatigue Behavior of Elbows with Local Wall Thinning
    Harun, Muhammad Faiz
    Mohammad, Roslina
    Kotousov, Andrei
    METALS, 2020, 10 (02)
  • [2] Low-cycle fatigue behavior of stainless-steel elbows having local wall thinning
    Ashiba, Yasuhiro
    Koizumi, Yuu
    Takahashi, Koji
    Hirano, Akihiko
    Takayamagi, Tsuneo
    Fukuhara, Yoshizumi
    Iwamatsu, Fuminori
    MECHANICAL ENGINEERING JOURNAL, 2020, 7 (03):
  • [3] Low cycle fatigue behaviors of elbow pipe with local wall thinning
    Takahashi, Koji
    Watanabe, Sota
    Ando, Kotoji
    Urabe, Yoshio
    Hidaka, Akitaka
    Hisatsune, Masakazu
    Miyazaki, Katsumasa
    NUCLEAR ENGINEERING AND DESIGN, 2009, 239 (12) : 2719 - 2727
  • [4] LOW CYCLE FATIGUE BEHAVIOR OF ELBOW PIPE WITH LOCAL WALL THINNING
    Takahashi, Koji
    Tsunoi, Satoshi
    Hara, Takumi
    Watanabe, Sota
    Mikami, Akira
    Takada, Hajime
    Ando, Kotoji
    Shiratori, Masaki
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2008, VOL 6, PT A AND B, 2009, : 891 - 896
  • [5] Finite element based plastic loads for elbows with local wall thinning
    Kim, Jong-Hyun
    Oh, Chang-Sik
    Ahn, Joon-Hyuk
    Kim, Yun-Jae
    Park, Chi-Yong
    Lee, Sung-Ho
    Kim, Tae-Ryong
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2007, VOL 6: MATERIALS AND FABRICATION, 2007, : 777 - 787
  • [6] Study on ratcheting effect of pressurized straight pipe with local wall thinning using finite element analysis
    Chen, Xiaohui
    Chen, Xu
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2016, 139 : 69 - 76
  • [7] Study on Ratcheting Effect of Pressurized Straight Pipe with Local Wall Thinning Using Finite Element Analysis
    Chen, X. H.
    Chen, X.
    PRESSURE VESSEL TECHNOLOGY: PREPARING FOR THE FUTURE, 2015, 130 : 1460 - 1469
  • [8] Effective numerical approach to assess low-cycle fatigue behavior of pipe elbows
    Jang, Heung Woon
    Hahm, Daegi
    Jung, Jae-Wook
    Hong, Jung-Wuk
    NUCLEAR ENGINEERING AND TECHNOLOGY, 2018, 50 (05) : 758 - 766
  • [9] Effect of Local Wall Thinning on Low-Cycle Fatigue Behaviors of Elbow with Internal Pressure -Estimation of Fatigue Life based on Revised Universal Slope Method-
    Takahashi, Koji
    Sato, Kyohei
    Matsuo, Kazuya
    Ando, Kotoji
    Urabe, Yoshio
    Hidaka, Akitaka
    Hisatsune, Masakazu
    Miyazaki, Katsumasa
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 1A: CODES AND STANDARDS, 2014,
  • [10] Low Cycle Fatigue Behavior and Seismic Assessment for Elbow Pipe Having Local Wall Thinning
    Urabe, Yoshio
    Takahashi, Koji
    Ando, Kotoji
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2012, 134 (04):