Cold sprayed metal-ceramic coatings using satellited powders

被引:33
|
作者
Al-Hamdani, K. S. [1 ,3 ]
Murray, J. W. [2 ]
Hussain, T. [2 ]
Kennedy, A. [2 ]
Clare, A. T. [1 ]
机构
[1] Univ Nottingham, ACEL, Nottingham NG7 2RD, England
[2] Univ Nottingham, Adv Mat Res Grp, Nottingham NG7 2RD, England
[3] Univ Thi Qar, Coll Engn, Nasiriyah 64001, Iraq
基金
英国工程与自然科学研究理事会;
关键词
Satelliting; Metal-ceramic; Titanium carbide; Aluminium; Cold spray; COMPOSITE COATINGS; TITANIUM; ALLOYS;
D O I
10.1016/j.matlet.2017.03.175
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A new 'satelliting' preparation method was used to create a feedstock of pure Al powder to which a much finer TiC powder was attached. Cold spray (CS) coatings of pure Al, blended Al/TiC and satellited Al/TiC were applied to Al substrates. A seven-fold increase in TiC area fraction was measured in the satellited coating compared to that in the blended coating. Coating thickness also increased as a result of increased ceramic deposition. Cross-sectional analysis revealed that the cohesion achieved between Al and TiC, during satelliting process, survives the CS process, and is hence an effective method of producing ceramic-metal coatings. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:184 / 187
页数:4
相关论文
共 50 条
  • [1] PLASMA SPRAYED METAL-CERAMIC COATINGS
    HECHT, NL
    AMERICAN CERAMIC SOCIETY BULLETIN, 1966, 45 (04): : 393 - &
  • [2] Cold Consolidation of Metal-Ceramic Nanocomposite Powders with Large Ceramic Fractions
    Menendez, Enric
    Salazar-Alvarez, German
    Zhilyaev, Alexander P.
    Surinach, Santiago
    Baro, Maria Dolors
    Nogues, Josep
    Sort, Jordi
    ADVANCED FUNCTIONAL MATERIALS, 2008, 18 (20) : 3293 - 3298
  • [3] Critical evaluation of adhesion tests in plasma sprayed metal-ceramic coatings
    Trevisan, R.E.
    Fals, H.C.
    Lima, C.R.C.
    Informacion Tecnologica, 2000, 11 (04): : 103 - 112
  • [4] Effect of Ceramic Particle Velocity on Cold Spray Deposition of Metal-Ceramic Coatings
    A. Sova
    V. F. Kosarev
    A. Papyrin
    I. Smurov
    Journal of Thermal Spray Technology, 2011, 20 : 285 - 291
  • [5] Effect of Ceramic Particle Velocity on Cold Spray Deposition of Metal-Ceramic Coatings
    Sova, A.
    Kosarev, V. F.
    Papyrin, A.
    Smurov, I.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2011, 20 (1-2) : 285 - 291
  • [6] Cold compaction of metal-ceramic powders in the preparation of copper base hybrid materials
    Leon, C. A.
    Rodriguez-Ortiz, G.
    Aguilar-Reyes, E. A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 526 (1-2): : 106 - 112
  • [7] Plasma Sprayed Metal-Ceramic Coatings and Modification of Their Structure with Pulsed Electron Beam Irradiation
    Solonenko, O. P.
    Ovcharenko, V. E.
    Ivanov, Yu. F.
    Golovin, A. A.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2011, 20 (04) : 927 - 938
  • [8] Influence of interfacial temperature on the adhesion properties of plasma-sprayed metal-ceramic coatings
    Lima, CRC
    Trevisan, RDE
    THERMAL SPRAY, VOLS 1 AND 2: MEETING THE CHALLENGES OF THE 21ST CENTURY, 1998, : 1555 - 1560
  • [9] Plasma Sprayed Metal-Ceramic Coatings and Modification of Their Structure with Pulsed Electron Beam Irradiation
    O. P. Solonenko
    V. E. Ovcharenko
    Yu. F. Ivanov
    A. A. Golovin
    Journal of Thermal Spray Technology, 2011, 20 : 927 - 938
  • [10] RADIATING CAPACITY OF METAL-CERAMIC COATINGS
    Patokin, A. P.
    Khrebtov, V. L.
    Shirokov, B. M.
    PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2006, (04): : 172 - 174