Optimized Input-Shaped Model Reference Control on Double-Pendulum System

被引:12
|
作者
Fujioka, Daichi [1 ]
Singhose, William [1 ]
机构
[1] Georgia Inst Technol, George W Woodruff Sch Mech Engn, Atlanta, GA 30332 USA
关键词
DESIGN; BRIDGE;
D O I
10.1115/1.4039786
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper presents an optimized input-shaped model reference control (OIS-MRC) for limiting oscillation of multimode flexible systems. The controller is analyzed by using it to control an uncertain, time-varying double pendulum using a linear single-pendulum reference model. Single-and double-pendulum dynamics are presented, and the significant natural frequency ranges of the double pendulum are calculated. A Lyapunov control law using only the first mode states of the plant is obtained. An optimization technique is used to obtain the OIS-MRC controller parameters that realizes the shortest time duration, while meeting a set of design constraints. The oscillation suppression, control effort reduction, and disturbance rejection performances of the proposed OIS-MRC controller are tested via numerical simulations and experiments. The OIS-MRC achieves a robust oscillation suppression performance, while reducing the rise time.
引用
收藏
页数:9
相关论文
共 50 条
  • [1] Robustness Analysis of Input-Shaped Model Reference Control on a Double-Pendulum Crane
    Fujioka, Daichi
    Shah, Manan
    Singhose, William
    2015 AMERICAN CONTROL CONFERENCE (ACC), 2015, : 2561 - 2566
  • [2] Input-Shaped Model Reference Control of a Nonlinear Time-Varying Double-Pendulum Crane
    Fujioka, Daichi
    Singhose, William
    2015 10TH ASIAN CONTROL CONFERENCE (ASCC), 2015,
  • [3] The control of a double-pendulum system
    Ataei, Mohammad
    Kiyoumarsi, Arash
    Isfahani, Mehdi Torabian
    Mirzaeian-Dehkordi, Bezad
    2007 INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS, VOLS 1-6, 2007, : 2576 - 2580
  • [4] Combined input shaping and feedback control for double-pendulum systems
    Mar, Robert
    Goyal, Anurag
    Nguyen, Vinh
    Yang, Tianle
    Singhose, William
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2017, 85 : 267 - 277
  • [5] Trajectory Tracking Control of a Double-pendulum System
    Briceno Perez, Jose Luis
    Rodriguez Herrera, Carlos Francisco
    2018 IEEE 2ND COLOMBIAN CONFERENCE ON ROBOTICS AND AUTOMATION (CCRA), 2018,
  • [6] Input shaping control of double-pendulum bridge crane oscillations
    Singhose, William
    Kim, Dooroo
    Kenison, Michael
    JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2008, 130 (03):
  • [7] COMBINED INPUT SHAPING AND FEEDBACK CONTROL OF A DOUBLE-PENDULUM SYSTEM SUBJECT TO EXTERNAL DISTURBANCES
    Mar, Robert
    Goyal, Anurag
    Vinh Nguyen
    Yang, Tianle
    Singhose, William
    PROCEEDINGS OF THE ASME 8TH ANNUAL DYNAMIC SYSTEMS AND CONTROL CONFERENCE, 2015, VOL 1, 2016,
  • [8] Interpretation of smooth reference commands as input-shaped functions
    Eloundou, R
    Singhose, W
    PROCEEDINGS OF THE 2002 AMERICAN CONTROL CONFERENCE, VOLS 1-6, 2002, 1-6 : 4948 - 4953
  • [9] Frequency-Modulation Input Shaping Control of Double-Pendulum Overhead Cranes
    Masoud, Ziyad N.
    Alhazza, Khaled A.
    JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2014, 136 (02):
  • [10] Input-Shaped Model Reference Control Using Sliding Mode Design for Sway Suppression of An Industrial Overhead Crane
    Suksabai, Nattapong
    Chuckpaiwong, Ittichote
    ENGINEERING JOURNAL-THAILAND, 2023, 27 (02): : 1 - 15