Effect of chloride ion on the anodic polarization behavior of the Zr65Al7.5Ni10Cu17.5 amorphous alloy in phosphate buffered solution

被引:84
|
作者
Hiromoto, S [1 ]
Tsai, AP [1 ]
Sumita, M [1 ]
Hanawa, T [1 ]
机构
[1] Natl Res Inst Met, Tsukuba, Ibaraki 3050047, Japan
关键词
biomaterial; zirconium-based amorphous alloy; polarization; X-ray photoelectron spectroscopy; chloride ion;
D O I
10.1016/S0010-938X(00)00022-6
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The corrosion behavior of the Zr65Al7.5Ni10Cu17.5 amorphous alloy was investigated in a phosphate buffered saline solution and in phosphate-citric acid buffered solutions with various chloride-ion concentrations from 0 to 1.0 M, to examine the performance of the alloy as a biomaterial. The surface condition of the non-polarized and polarized alloy in the passive region was characterized using X-ray photoelectron spectroscopy. The susceptibility of this alloy to pitting corrosion was small at a small amount of chloride ion, but it increased with the chloride-ion concentration. Phosphate ion adsorbed on zirconium oxide in the surface raised the susceptibility to the pitting corrosion. On the other hand, phosphate ion is hardly adsorbed by aluminum oxide, so aluminum oxide in the surface diminished the susceptibility to the pitting corrosion. (C) 2000 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:1651 / 1660
页数:10
相关论文
共 50 条
  • [1] Effect of pH on the polarization behavior of Zr65Al7.5Ni10Cu17.5 amorphous alloy in a phosphate-buffered solution
    Hiromoto, S
    Tsai, AP
    Sumita, M
    Hanawa, T
    CORROSION SCIENCE, 2000, 42 (12) : 2193 - 2200
  • [2] Effects of surface finishing and dissolved oxygen on the polarization behavior of Zr65Al7.5Ni10Cu17.5 amorphous alloy in phosphate buffered solution
    Hiromoto, S
    Tsai, AP
    Sumita, M
    Hanawa, T
    CORROSION SCIENCE, 2000, 42 (12) : 2167 - 2185
  • [3] Corrosion behavior of Zr65Al7.5Ni10Cu17.5 amorphous alloy for biomedical use
    Hiromoto, S
    Tsai, AP
    Sumita, M
    Hanawa, T
    MATERIALS TRANSACTIONS, 2001, 42 (04) : 656 - 659
  • [4] Laser cladding of Zr65Al7.5Ni10Cu17.5 amorphous alloy on magnesium
    Yue, T. M.
    Su, Y. P.
    Yang, H. O.
    MATERIALS LETTERS, 2007, 61 (01) : 209 - 212
  • [5] PREPARATION OF 16 MM DIAMETER ROD OF AMORPHOUS ZR65AL7.5NI10CU17.5 ALLOY
    INOUE, A
    ZHANG, T
    NISHIYAMA, N
    OHBA, K
    MASUMOTO, T
    MATERIALS TRANSACTIONS JIM, 1993, 34 (12): : 1234 - 1237
  • [6] Re-passivation current of amorphous Zr65Al7.5Ni10Cu17.5 alloy in a Hanks' balanced solution
    Hiromoto, S
    Hanawa, T
    ELECTROCHIMICA ACTA, 2002, 47 (09) : 1343 - 1349
  • [7] Temperature and strain rate dependence of deformation behavior of Zr65Al7.5Ni10Cu17.5
    Ge, Yongneng
    Song, Wenbo
    Wang, Xiufeng
    Luo, Zhichun
    Li, Wen
    Lin, Jianguo
    MATERIALS CHEMISTRY AND PHYSICS, 2010, 124 (01) : 25 - 28
  • [8] Laser multi-layer cladding of Zr65Al7.5Ni10Cu17.5 amorphous alloy on magnesium substrates
    Tai Man Yue
    Yun P. Su
    Journal of Materials Science, 2007, 42 : 6153 - 6160
  • [9] Laser multi-layer cladding of Zr65Al7.5Ni10Cu17.5 amorphous alloy on magnesium substrates
    Yue, Tai Man
    Su, Yun P.
    JOURNAL OF MATERIALS SCIENCE, 2007, 42 (15) : 6153 - 6160
  • [10] Redistribution behavior of constitutional elements at an initial crystallization stage in the Zr65Al7.5Ni10Cu17.5 glassy alloy
    Saida, J
    Matsushita, M
    Inoue, A
    JOURNAL OF MATERIALS RESEARCH, 2001, 16 (01) : 28 - 31