Nondestructive Testing of GFRP Bridge Decks Using Ground Penetrating Radar and Infrared Thermography

As glass fiber-reinforced polymer (GFRP) bridge decks are becoming a feasible alternative to the traditional concrete bridge decks, an innovative methodology to evaluate the in situ conditions are vital to GFRP bridge decks' full implementation. Ground penetrating radar (GPR) typically performs well in detecting subsurface condition of a structural component with moisture pockets trapped within the material. On the other hand, infrared thermography (IRT) is traditionally known for its ability to detect air pockets within the material. In order to evaluate both nondestructive testing methods' effectiveness for subsurface condition assessment of GFRP bridge deck, debonds of various sizes were embedded into a GFRP bridge deck module. A 1.5 GHz ground-coupled GPR system and a radiometric infrared camera were used to scan the deck module for condition assessment. Test results showed that both GPR and IRT retained their respective effectiveness in detecting subsurface anomalies. GPR was found to be capable of detecting water-filled defects as small as 5x5 cm(2) in plan size, and as thin as 0.15 cm. Furthermore, tests on additional specimens showed that the GPR system offers some promise in detecting bottom flange defects as far down as 10 cm deep. IRT, on the other hand, showed that it is capable of finding both water-filled and air-filled defects within the top layers of the deck with solar heating as main source of heat flux. While test results showed IRT is more sensitive to air-filled defects, water-filled defects can still be detected with a large enough heating mechanism. The experiments showed that a more detailed and accurate assessment can be achieved by combining both GPR and IRT.