A Comparison Between the NIST PJVS-Based Power Standard and the NRC Current-Comparator-Based Power Standard

被引：0

作者：

Waltrip, Bryan C. ^{[1
]}

Nelson, Thomas L. ^{[1
]}

So, Eddy ^{[2
]}

Angelo, David ^{[2
]}

机构：

[1] NIST, Gaithersburg, MD 20899 USA

[2] Natl Res Council Canada, Ottawa, ON K1A 0R6, Canada

来源：

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT | 2015年 / 64卷 / 01期

关键词：

Bridge circuits; current-comparator; Josephson junctions; power measurement; wattmeters; METER CALIBRATIONS; 60; HZ;

D O I：

10.1109/TIM.2014.2329386

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper presents the results of a comparison of active/reactive power meter calibrations between the National Institute of Standards and Technology and National Research Council. The comparison was implemented using a transfer standard consisting of a highly stable commercial sampling-type power/energy meter. Active and reactive power measurements were made at 120 V, 5 A, 50 Hz, and 60 Hz. For active power, the measurements were made at applied current phase angles of 0 degrees, +60 degrees, and -60 degrees. For reactive power, the measurements were made at applied current phase angles of +60 degrees, +90 degrees, -60 degrees, and -90 degrees. The results of the comparison indicate agreement to within the stated uncertainties of the participants.(1)

引用

页码：14 / 18

页数：5

共 50 条

[1] An Improved Current-Comparator-Based Power Standard With an Uncertainty of 2.5 μW/VA (k=1)
So, Eddy
Arseneau, Rejean
Angelo, Dave
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2013, 62 (06) : 1704 - 1709
[2] Development of a PJVS Based Primary AC Power Standard
Ihlenfeld, W. G. Kurten
Landim, R. P.
Franco, A. M. R.
Debatin, R. M.
2016 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS (CPEM 2016), 2016,
[3] Design of DC Power Standard Source Based on PJVS
Qian, Lushuai
Zhai, Changwei
Zhao, Jianting
Qu, Jifeng
Shi, Yang
Fu, Yaqiong
2024 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS, CPEM 2024, 2024,
[4] A MODIFIED TECHNIQUE FOR THE CALIBRATION OF A CURRENT-COMPARATOR-BASED HIGH VOLTAGE CAPACITANCE BRIDGE AND ITS COMPARISON BETWEEN KRISS AND NRC
Faisal, Agah
Jung, Jae Kap
So, Eddy
2010 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS CPEM, 2010, : 671 - +
[5] A CURRENT-COMPARATOR-BASED SYSTEM FOR CALIBRATING ACTIVE REACTIVE POWER AND ENERGY METERS
MOORE, WJM
SO, E
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 1983, 32 (01) : 147 - 149
[6] A CURRENT-COMPARATOR-BASED LOAD LOSS STANDARD FOR INSITU CALIBRATION OF TRANSFORMER LOSS MEASURING SYSTEMS
SO, E
IEEE TRANSACTIONS ON POWER DELIVERY, 1988, 3 (04) : 1363 - 1368
[7] A Synchronized Current-Comparator-Based Power Bridge for Calibrating Analog Merging Units
Djokic, Branislav
Parks, Harold
2018 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS (CPEM 2018), 2018,
[8] A current-comparator-based bridge for calibrating power and energy standards at 50/60 Hz
Kyriazis, GA
Oldham, NM
Werneck, M
2002 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS, CONFERENCE DIGEST, 2002, : 256 - 257
[9] A CURRENT-COMPARATOR-BASED WATTMETER FOR HIGH-VOLTAGE POWER MEASUREMENTS AT VERY LOW-POWER FACTORS
SO, E
IEEE TRANSACTIONS ON POWER DELIVERY, 1987, 2 (04) : 1018 - 1024
[10] A two-way Josephson voltage standard comparison between NIST and NRC
Tang, Y.
Wood, B.
Hamilton, C. A.
2008 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS DIGEST, 2008, : 600 - +

← 1 2 3 4 5 →