ITER dome fabrication processes

被引：0
|
作者：
Wille, GW [1 ]
Driemeyer, DE [1 ]
Chatterton, WJ [1 ]
Foreman, KD [1 ]
机构：
[1] Boeing Co, St Louis, MO 63166 USA
来源：
18TH IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING | 1999年
关键词：
D O I：
10.1109/FUSION.1999.849860
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
The 3/4-ton International Thermonuclear Experimental Reactor (ITER) divertor dome component is fabricated from three dissimilar metals-stainless steel, copper, and tungsten. It is actively cooled to withstand heat loads of 5 MW/m2 during nominal operation, transient heat loads of 15 MW/m2 for 1-2 seconds, and volumetric heating of 0.5-5 MW/m3. The divertor dome is comprised of two subcomponents: a 316L cast stainless steel dome shield block with internal coolant passages and a CuCrZr plasma-facing component (PFC) with internal coolant passages and a 15-mm-thick layer of diffusion bonded W-brush armor. This paper describes the processes developed for fabricating the stainless steel dome shield block and CuCrZr plasma-facing component (PFC) and the resulting mechanical properties of the copper and stainless steel joined by the hot-isostatic-pressing assisted diffusion bonding techniques.
引用
收藏
页码：377 / 380
页数：4
相关论文
共 50 条
  • [1] Effect of the dome on divertor performance in ITER
    Kukushkin, A. S.
    Pacher, H. D.
    Kotov, V.
    Reiter, D.
    Coster, D. P.
    Pacher, G. W.
    JOURNAL OF NUCLEAR MATERIALS, 2007, 363 (1-3) : 308 - 313
  • [2] ITER divertor dome manufacturing development
    Wille, GW
    Slattery, KT
    Driemeyer, DE
    Cole, FR
    17TH IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, VOLS 1 AND 2, 1998, : 949 - 952
  • [3] Development of the armoring technique for ITER Divertor Dome
    Litunovsky, Nikolay
    Alekseenko, Evgeny
    Makhankov, Alexey
    Mazul, Igor
    FUSION ENGINEERING AND DESIGN, 2011, 86 (9-11) : 1749 - 1752
  • [4] Development Of Joining Processes And Fabrication Of US First Wall Qualification Mockups For ITER
    Goods, S. H.
    Puskar, J. D.
    Watson, R. M.
    Ulrickson, M. A.
    2009 23RD IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, 2009, : 194 - +
  • [5] Fabrication of divertor cassette for ITER
    Sanguinetti, Gian Paolo
    ATW-INTERNATIONAL JOURNAL FOR NUCLEAR POWER, 2008, 53 (10): : 637 - +
  • [6] Conductor fabrication for the ITER model coils
    Bruzzone, P
    Mitchell, N
    Steeves, M
    Spadoni, M
    Takahashi, Y
    Sytnikov, VE
    IEEE TRANSACTIONS ON MAGNETICS, 1996, 32 (04) : 2300 - 2303
  • [7] Fabrication of an ITER shielding blanket prototype
    Japan Atomic Energy Research Inst, Ibaraki-ken, Japan
    Fusion Technol, 3 pt 2 (892-897):
  • [8] Fabrication of an ITER shielding blanket prototype
    Sato, S
    Hatano, T
    Takatsu, H
    Osaki, T
    Kuroda, T
    Yamada, K
    Enoeda, M
    Sato, S
    Furuya, K
    Ohara, Y
    FUSION TECHNOLOGY, 1998, 34 (03): : 892 - 897
  • [9] ITER divertor cassette body fabrication
    Chatterton, WJ
    Foreman, KD
    Driemeyer, DE
    Wille, GW
    Andresen, PL
    18TH IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, 1999, : 373 - 376
  • [10] Development of fabrication technologies for the ITER divertor
    Ise, H
    Satoh, S
    Yamazaki, S
    Akiba, MA
    Nakamura, K
    Suzuki, S
    Araki, M
    FUSION ENGINEERING AND DESIGN, 1998, 39-40 : 513 - 519
12345