Preparation of "green" composites by the sol-gel process:: In situ silica filled natural rubber

被引：64

作者：

Ikeda, Y ^{[1
]}

Kameda, Y ^{[1
]}

机构：

[1] Kyoto Inst Technol, Fac Engn & Design, Kyoto 6068585, Japan

来源：

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY | 2004年 / 31卷 / 1-3期

关键词：

nano-composites; natural rubber; silica; sol-gel reaction; reinforcement;

D O I：

10.1023/B:JSST.0000047975.48812.1b

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Green composites with different amounts of in situ silica nano-particles were prepared by a sol-gel reaction of tetraethoxysilane (TEOS) in natural rubber (NR). The control of swelling degree of TEOS in NR and concentration of n-butylamine in water was useful to change the amount of generated in situ silica in the uncured NR matrix. In situ silica up to 42 parts per hundred rubber by weight (phr) was successfully filled in the NR matrix. The particle size of in situ silica became larger with the increase of silica content from ca. 10 nm to ca. 40 nm for 10 phr - 40 phr loadings in the NR matrix, respectively. Even when the amount of in situ silica content was high, the dispersion of in situ silica particles was more homogeneous than that of commercial silica (VN-3). The reinforcement effect of the in situ silica for NR vulcanizates increased with increasing the in situ silica content.

引用

页码：137 / 142

页数：6

共 50 条

[1] Preparation of “Green” Composites by the Sol-Gel Process: In Situ Silica Filled Natural Rubber
Y. Ikeda
Y. Kameda
Journal of Sol-Gel Science and Technology, 2004, 31 : 137 - 142
[2] In Situ Silica Filled Styrene grafted Natural Rubber by the Sol-Gel Process
Sittiphan, Torpong
Prasassarakich, Pattarapan
Poompradub, Sirilux
FUNCTIONALIZED AND SENSING MATERIALS, 2010, 93-94 : 525 - +
[3] In situ filling of silica onto "green" natural rubber by the sol-gel process
Kohjiya, S
Murakami, K
Iio, S
Tanahashi, T
Ikeda, Y
RUBBER CHEMISTRY AND TECHNOLOGY, 2001, 74 (01): : 16 - 27
[4] Preparation of In Situ Silica filled natural Rubber by Sol-Gel Reaction of Sodium Silicate in natural Rubber Latex
Suwandittakul, P.
Montha, S.
Kongkaew, C.
Kongkaew, A.
Phanpheng, K.
Wiriyasoontorn, S.
KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 2018, 71 (04): : 46 - 53
[5] In situ silica reinforcement of natural rubber by sol-gel process via rubber solution
Chaichua, Benjawan
Prasassarakich, Pattarapan
Poompradub, Sirilux
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2009, 52 (02) : 219 - 227
[6] In situ generated silica in natural rubber latex via the sol-gel technique and properties of the silica rubber composites
Poompradub, Sirilux
Thirakulrati, Mantana
Prasassarakich, Pattarapan
MATERIALS CHEMISTRY AND PHYSICS, 2014, 144 (1-2) : 122 - 131
[7] In situ silica reinforcement of methyl methacrylate grafted natural rubber by sol-gel process
Watcharakul, Natchamon
Poompradub, Sirilux
Prasassarakich, Pattarapan
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2011, 58 (02) : 407 - 418
[8] Friction and abrasion properties of in-situ silica-filled natural rubber nanocomposites using sol-gel process
Nah, Changwoon
Kim, D.H.
Kim, W.D.
Im, W.-B.
Kaang, S.
KGK-Kautschuk und Gummi Kunststoffe, 2004, 57 (05): : 224 - 226
[9] Friction and abrasion properties of in-situ silica-filled natural rubber nanocomposites using sol-gel process
Nah, C
Kim, DH
Kim, JWD
Im, TKWB
Kaang, KKS
KAUTSCHUK GUMMI KUNSTSTOFFE, 2004, 57 (05): : 224 - 226
[10] In situ silica reinforcement of natural rubber by sol–gel process via rubber solution
Benjawan Chaichua
Pattarapan Prasassarakich
Sirilux Poompradub
Journal of Sol-Gel Science and Technology, 2009, 52 : 219 - 227

← 1 2 3 4 5 →