A thermodynamically-based viscoelastic-viscoplastic model for the high temperature cyclic behaviour of 9-12% Cr steels

被引:41
|
作者
Benaarbia, A. [1 ]
Rouse, J. P. [1 ]
Sun, W. [1 ]
机构
[1] Univ Nottingham, Dept Mech Mat & Mfg Engn, Nottingham NG7 2RD, Notts, England
基金
英国工程与自然科学研究理事会;
关键词
Cyclic viscoplasticity; Fatigue-relaxation; High-temperature steels; Thermodynamics of irreversible processes; FATIGUE-OXIDATION INTERACTIONS; KINEMATIC HARDENING RULES; 9CR-1MO MARTENSITIC STEEL; CONSTITUTIVE MODEL; HOLDING PERIOD; DAMAGE MODEL; PART; CREEP; PLASTICITY; P91;
D O I
10.1016/j.ijplas.2018.03.015
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Improving the understanding of the long term rate dependent behaviour of materials is of critical importance in many engineering applications. Without this understanding, it is potentially difficult to ensure safe and effective plant operation while simultaneously satisfying requirements for sustainability and responsible resource management. In the present work, a thermodynamically-based constitutive model is proposed to capture the rate sensitivity, the stress relaxation and the accelerated cyclic softening observed during cyclic deformation of a P91 steel at an elevated temperature (600 degrees C). The model is developed within the framework of Thermodynamics of Irreversible Processes and Generalized Standard Materials formalism, thereby offering a thermodynamically grounded coupling of both viscoelasticity (semi-recoverable strain accumulation at vastly different time scales) and viscoplasticity (irreversible strain observed above the stress threshold). The later part combines a hyperbolic sine-power flow rule with non-linear isothermal cyclic evolution of isotropic and kinematic hardening. The applicability of the model to various mechanical loadings (e.g., cyclic tensile-compression tests, fatigue relaxation tests, anhysteretic tests) is validated by designing a heuristic optimisation program based on a nonlinear least-squares function coupled with the Levenberg-Marquardt algorithm. The optimisation procedure is informed (through the estimation of initial material parameter estimates and objective function evaluation) by anhysteretic type experiential data only (wherein long term load hold periods are introduced at various points in the waveform). Rate dependency is determined and validated by considering experimental waveforms with different loading (strain) rates (0.1%.s(-1) 0.01%.s(-1) and 0.001%.s(-1)) and ranges (0.25%, 0.4% and 0.5%) to highlight most of the deformation mechanisms involved during the fatigue and relaxation processes. By comparing predicted and experimentally observed material responses, it is demonstrated in the present work that the viscoelastic-viscoplastic strain decomposition has the ability to capture the accelerated cyclic softening and the uncoupled stress relaxation behaviour (below and above yielding) for a P91 steel at elevated temperatures.
引用
收藏
页码:100 / 121
页数:22
相关论文
共 50 条
  • [1] A large strain thermodynamically-based viscoelastic-viscoplastic model with application to finite element analysis of polytetrafluoroethylene (PTFE)
    Carvalho, Pericles R. P.
    Coda, Humberto B.
    Sanches, Rodolfo A. K.
    [J]. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2023, 97
  • [2] Micromechanical model of the high temperature cyclic behavior of 9-12%Cr martensitic steels
    Fournier, B.
    Sauzay, M.
    Pineau, A.
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2011, 27 (11) : 1803 - 1816
  • [3] A finite strain thermodynamically-based constitutive modeling and analysis of viscoelastic-viscoplastic deformation behavior of glassy polymers
    Wang, J.
    Peng, L. F.
    Deng, Y. J.
    Lai, X. M.
    Fu, M. W.
    Ni, J.
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2019, 122 : 135 - 163
  • [4] Creep simulation of 9-12% Cr steels using the composite model with thermodynamically calculated input
    Barkar, T
    Ågren, J
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 395 (1-2): : 110 - 115
  • [5] Diffusion coatings for high temperature corrosion protection of 9-12%Cr steels
    Rohr, V
    Donchev, A
    Schütze, M
    Milewska, A
    Pérez, FJ
    [J]. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2005, 40 (03) : 226 - 232
  • [6] A dislocation-based model for high temperature cyclic viscoplasticity of 9-12Cr steels
    Barrett, R. A.
    O'Donoghue, P. E.
    Leen, S. B.
    [J]. COMPUTATIONAL MATERIALS SCIENCE, 2014, 92 : 286 - 297
  • [7] High temperature creep-fatigue-oxidation interactions in 9-12%Cr martensitic steels
    Benjamin, Fournier
    Maxime, Sauzay
    Christel, Caes
    Michel, Noblecourt
    Veronique, Rabeau
    Annick, Bougault
    Andre, Pineau
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2009, 386-88 : 418 - 421
  • [8] Developmental state of high alloy 9-12%Cr-steels
    Oehmigen, HG
    Berger, C
    Bretfeld, H
    [J]. CORROSIVE DAMAGE IN POWER PLANTS, 1997, 1333 : 231 - 268
  • [9] Uniaxial mean stress relaxation of 9-12% Cr steel at high temperature: Experiments and viscoplastic constitutive modeling
    Wu, De-Long
    Xuan, Fu-Zhen
    Guo, Su-Juan
    Zhao, Peng
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2016, 77 : 156 - 173
  • [10] Effect of cyclic loadings on stress relaxation behaviors of 9-12%Cr steel at high temperature
    Wang, Cheng
    Xuan, Fu-Zhen
    Zhao, Peng
    Guo, Su-Juan
    [J]. MECHANICS OF MATERIALS, 2021, 156