Cutting characteristics of PVD-coated tools deposited by filtered arc deposition (FAD) method

被引：7
|
作者：
Hosokawa, Akira [1 ]
Hoshino, Goushi [2 ]
Koyano, Tomohiro [1 ]
Ueda, Takashi [3 ]
机构：
[1] Kanagawa Univ, Fac Mech Engn, Inst Sci & Engn, Kanazawa, Ishikawa, Japan
[2] Kanazawa Univ, Div Mech Sci & Engn, Grad Sch Nat Sci & Technol, Kanazawa, Ishikawa, Japan
[3] Nagoya Univ, Dept Mech Sci & Engn, Grad Sch Engn, Nagoya, Aichi, Japan
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2018年 / 67卷 / 01期
关键词：
Cutting tool; Coating; End milling; COATINGS; TEMPERATURE; PERFORMANCE;
D O I：
10.1016/j.cirp.2018.03.012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The cutting characteristics of novel physical vapor deposition (PVD)-coated tools deposited using filtered arc deposition (FAD) method are investigated. The TiCN-coated films are extremely smooth without any droplets. They exhibit superior hardness and adherence and a favorable cutting performance for the high-speed milling of a prehardened stainless steel. The availability of a newly proposed VN film is also examined. Owing to the good lubrication and tribological properties of the VN coating film, the lower cutting force, flank wear with, and cutting temperature than those of the TiN-coated tool are obtained in milling of the prehardened steel. (C) 2018 Published by Elsevier Ltd on behalf of CIRP.
引用
收藏
页码：83 / 86
页数：4
相关论文
共 50 条
  • [1] Cutting characteristics of PVD-coated tools deposited by Unbalanced Magnetron Sputtering method
    Hosokawa, Akira
    Shimamura, Koji
    Ueda, Takashi
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2012, 61 (01) : 95 - 98
  • [2] Arc PVD-coated cutting tools for modern machining applications
    Lugscheider, E
    Knotek, O
    Barimani, C
    Zimmermann, H
    [J]. SURFACE & COATINGS TECHNOLOGY, 1997, 94-5 (1-3): : 641 - 646
  • [3] Wear mechanisms of PVD-coated PCBN cutting tools
    M'Saoubi, R.
    Johansson, M. P.
    Andersson, J. M.
    [J]. WEAR, 2013, 302 (1-2) : 1219 - 1229
  • [4] Residual stress gradients in PVD-coated carbide cutting tools
    Denkena, Berend
    Breidenstein, Bernd
    [J]. RESIDUAL STRESSES VII, 2006, 524-525 : 607 - 612
  • [5] Cutting performance of PVD-coated carbide and CBN tools in hardmilling
    Okada, Masato
    Hosokawa, Akira
    Tanaka, Ryutaro
    Ueda, Takashi
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2011, 51 (02): : 127 - 132
  • [6] Significance of residual stress in PVD-coated carbide cutting tools
    Breidenstein, Bernd
    Denkena, Berend
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2013, 62 (01) : 67 - 70
  • [7] Cutting Characteristics of PVD Coated Cutting Tools
    Gupta, Kolla Meheresh
    Ramdev, Kamakoti
    Dharmateja, Sai
    Sivarajan, S.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (05) : 11260 - 11267
  • [8] Residual Stress Development in Laser Machined PVD-Coated Carbide Cutting Tools
    Breidenstein, Bernd
    Gey, Christoph
    Denkena, Berend
    [J]. INTERNATIONAL CONFERENCE ON RESIDUAL STRESSES 9 (ICRS 9), 2014, 768-769 : 391 - +
  • [9] Enhancing corrosion resistance of PVD-coated tools
    Vencovsky, PK
    Sanchez, R
    Branco, JRT
    Galvano, M
    [J]. SURFACE & COATINGS TECHNOLOGY, 1998, 108 (1-3): : 599 - 603
  • [10] Influence of the residual stress state on cohesive damage of PVD-Coated carbide cutting tools
    Denkena, Berend
    Breidenstein, Bemd
    [J]. ADVANCED ENGINEERING MATERIALS, 2008, 10 (07) : 613 - 616
12345