A novel architecture for current-feedback instrumentation amplifiers with rail-to-rail input range

被引:0
|
作者
Del Cesta, F. [1 ]
Longhitano, A. N. [1 ]
Bruschi, P. [1 ]
Piotto, M. [2 ]
机构
[1] Univ Pisa, Dipartimento Ingn Informaz, Pisa, Italy
[2] IEIIT, CNR, Pisa, Italy
关键词
instrumentation amplifier; current-feedback; rail-to-rail common-mode voltage range; sensor interface;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This paper presents a fully-differential current-feedback instrumentation amplifier with rail-to-rail input common-mode (CM) voltage range. Gm mismatches due to input CM variations have been reduced exploiting an original common-modes equalization loop. Chopping modulation is adopted to improve the performances of the amplifier in terms of offset and low frequency noise, while the intrinsic low-pass transfer function of the amplifier is exploited for the reduction of the offset-ripple. A prototype has been designed using the UMC 0.18um MM/RF CMOS process. Simulations, performed with a supply voltage of 1.5 V, showed that a maximum relative gain error of nearly +/-1.5 %, against rail-to-rail input CM voltage variations, can be achieved.
引用
下载
收藏
页数:4
相关论文
共 50 条
  • [1] Design of current feedback instrumentation amplifiers with rail-to-rail input-output ranges
    Catania, A.
    Del Cesta, S.
    Bruschi, P.
    Piotto, M.
    2017 13TH CONFERENCE ON PH.D. RESEARCH IN MICROELECTRONICS AND ELECTRONICS (PRIME), 2017, : 125 - 128
  • [2] Current mode instrumentation amplifier with rail-to-rail input and output
    Beber Vieira, Filipe Costa
    Prior, Cesar Augusto
    Rodrigues, Cesar Ramos
    Perin, Leonardo
    dos Santos Martins, Joao Baptista
    ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING, 2008, 57 (1-2) : 29 - 37
  • [3] Current Mode Instrumentation Amplifier with Rail-to-Rail Input and Output
    Vieira, Filipe C. B.
    Prior, Cesar A.
    Rodrigues, Cesar R.
    Perin, Leonardo
    Martins, Joao B. S.
    SBCCI2007: 20TH SYMPOSIUM ON INTEGRATED CIRCUITS AND SYSTEMS DESIGN, 2007, : 48 - 52
  • [4] Current mode instrumentation amplifier with rail-to-rail input and output
    Filipe Costa Beber Vieira
    Cesar Augusto Prior
    Cesar Ramos Rodrigues
    Leonardo Perin
    João Baptista dos Santos Martins
    Analog Integrated Circuits and Signal Processing, 2008, 57 : 29 - 37
  • [5] INDIRECT CURRENT-FEEDBACK INSTRUMENTATION AMPLIFIER WITH A COMMON-MODE INPUT RANGE THAT INCLUDES THE NEGATIVE RAIL
    VANDENDOOL, BJ
    HUIJSING, JH
    IEEE JOURNAL OF SOLID-STATE CIRCUITS, 1993, 28 (07) : 743 - 749
  • [6] A novel constant-gm rail-to-rail input stage for operational amplifiers
    Chen, Zhizhi
    Wang, Qian
    Li, Xi
    Song, Sannian
    Chen, XiaoGang
    Chen, HouPeng
    Song, Zhitang
    IEICE ELECTRONICS EXPRESS, 2023, 20 (15): : 1 - 6
  • [7] Switched-Capacitor Level-Shifting Technique With Sampling Noise Reduction for Rail-to-Rail Input Range Instrumentation Amplifiers
    Ivanov, Evgeny V.
    IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS, 2012, 59 (12) : 2867 - 2880
  • [8] PUSH-PULL CURRENT CIRCUIT FOR BIASING CMOS AMPLIFIERS WITH RAIL-TO-RAIL INPUT COMMON-MODE RANGE
    DUQUECARRILLO, JF
    PEREZALOE, R
    MORILLO, A
    ELECTRONICS LETTERS, 1991, 27 (23) : 2122 - 2125
  • [9] A new architecture for rail-to-rail input constant-gm CMOS operational transconductance amplifiers
    Ahmadi, MM
    Lotfi, R
    Sharif-Bakhtiar, M
    ISLPED'03: PROCEEDINGS OF THE 2003 INTERNATIONAL SYMPOSIUM ON LOW POWER ELECTRONICS AND DESIGN, 2003, : 353 - 358
  • [10] A very compact CMOS instrumentation amplifier with nearly rail-to-rail input common mode range
    Bruschi, P.
    Del Cesta, F.
    Longhitano, A. N.
    Piotto, M.
    Simmarano, R.
    PROCEEDINGS OF THE 40TH EUROPEAN SOLID-STATE CIRCUIT CONFERENCE (ESSCIRC 2014), 2014, : 323 - +