Augmentation of dye-sensitized solar cell photovoltaic conversion efficiency via incorporation of terpolymer Poly(vinyl butyral-co-vinyl alcohol-co-vinyl acetate) based gel polymer electrolytes

A dye-sensitized solar cell (DSSC) is the alternative photovoltaic technology for the replacement of the standard photovoltaic liquid electrolyte-dependent cell. Gel polymer electrolyte (GPE) was used in this research to replace the volatile liquid electrolyte. This GPE has been developed using terpolymer type Poly(vinyl butyral-co-vinyl alcohol-co-vinyl acetate) P(VB-co-VA-co-VAc), iodine (I2), sodium iodide (NaI), and ethanol. The findings from X-ray diffraction (XRD) showed the effect of NaI on the crystalline content of the electrolyte systems. Samples showed higher conductivity with a lower degree of crystallinity. Differential scanning calorimetry (DSC) analysis revealed the slight decrease in melting temperature (Tm) upon addition of NaI salts. The thermogravimetric analysis (TGA) showed that GPE ?s thermal stability decreases as NaI salt content increases. Fouriertransform infrared (FTIR) results indicated that P(VB-co-VA-co-VAc) interacted with NaI. The highest room temperature ionic conductivity of 3.22 ? 10-3 S cm-1 by the sample with 30 wt % NaI. Temperature-dependent findings showed that all GPE samples adhere to the Arrhenius equation in the temperature range from 303 K to 373K and found the lowest activation energy obtained by the sample with 30 wt % NaI as 0.066 eV. Dielectric and modulus properties of all samples have been studied. DSSC fabricated using the electrolyte containing 30 wt % NaI has achieved the highest conversion efficiency of 4.01% with maximum JSC value of 12.52 mA cm-2, VOC of 0.61 V, and fill factor (FF) of 51.8%.