A Combined Numerical-Experimental Approach to Quantify the Thermal Contraction of A356 During Solidification

被引：7
|
作者：
Macht, J. P. [1 ]
Maijer, D. M. [1 ]
Phillion, A. B. [2 ]
机构：
[1] Univ British Columbia, Dept Mat Engn, Vancouver, BC V6T 1Z4, Canada
[2] McMaster Univ, Dept Mat Sci & Engn, Hamilton, ON L8S 4L7, Canada
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2017年 / 48A卷 / 07期
基金：
加拿大自然科学与工程研究理事会;
关键词：
Heat Transfer Coefficient; Thermal Contraction; Finite Element Analysis Model; Thermal Contact Conductance; Solidification Contraction;
D O I：
10.1007/s11661-017-4097-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A process for generating thermal contraction coefficients for use in the solidification modeling of aluminum castings is presented. Sequentially coupled thermal-stress modeling is used in conjunction with experimentation to empirically generate the thermal contraction coefficients for a strontium-modified A356 alloy. The impact of cooling curve analysis on the modeling procedure is studied. Model results are in good agreement with experimental findings, indicating a sound methodology for quantifying the thermal contraction. The technique can be applied to other commercially relevant aluminum alloys, increasing the utility of solidification modeling in the casting industry.
引用
收藏
页码：3370 / 3376
页数：7
相关论文
共 50 条
  • [1] A Combined Numerical–Experimental Approach to Quantify the Thermal Contraction of A356 During Solidification
    J. P. Macht
    D. M. Maijer
    A. B. Phillion
    Metallurgical and Materials Transactions A, 2017, 48 : 3370 - 3376
  • [2] Comparison of Semi-Solid Contraction of Aluminum Alloys During Solidification Quantified by a Combined Numerical-Experimental Approach
    Alhejazi, H. J.
    Maijer, D. M.
    Macht, J. P.
    Phillion, A. B.
    METALS AND MATERIALS INTERNATIONAL, 2022, 28 (08) : 1783 - 1793
  • [3] Comparison of Semi-Solid Contraction of Aluminum Alloys During Solidification Quantified by a Combined Numerical-Experimental Approach
    H. J. Alhejazi
    D. M. Maijer
    J. P. Macht
    A. B. Phillion
    Metals and Materials International, 2022, 28 : 1783 - 1793
  • [4] Experimental characterisation of a semi-solid A356 alloy during solidification and remelting
    Dziallach, S.
    Benke, S.
    Prahl, U.
    Bleck, W.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2009, 22 (1-4) : 248 - 251
  • [5] Numerical study of solidification of A356 aluminum alloy flowing on an oblique plate with experimental validation
    Kund, N. K.
    Dutta, P.
    JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2015, 51 : 159 - 170
  • [6] Solidification of A356 Al alloy: Experimental study and modeling
    Shabani, M. O.
    Mazahery, A.
    Bahmani, A.
    Davami, P.
    Varahram, N.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2011, 49 (04): : 253 - 258
  • [7] A study on the variation of solidification contraction of A356 aluminum alloy with Sr addition
    Kim, JH
    Choi, JW
    Choi, JP
    Lee, CH
    Yoon, EP
    JOURNAL OF MATERIALS SCIENCE LETTERS, 2000, 19 (15) : 1395 - 1398
  • [8] Rheology of A356 Alloy During Solidification Under Stirring
    N. Barman
    P. Dutta
    Transactions of the Indian Institute of Metals, 2014, 67 : 101 - 104
  • [9] Rheology of A356 Alloy During Solidification Under Stirring
    Barman, N.
    Dutta, P.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2014, 67 (01) : 101 - 104
  • [10] Modeling of microporosity formation during solidification of A356 aluminum casting
    Ding, R
    Maijer, D
    Cockcroft, SL
    Howard, J
    LIGHT METALS 2003, 2003, : 929 - 936
12345