Can three-dimensional patient-specific cutting guides be used to achieve optimal correction for high tibial osteotomy? Pilot study

被引:88
|
作者
Munier, M. [1 ]
Donnez, M. [1 ,2 ]
Ollivier, M. [1 ]
Flecher, X. [1 ]
Chabrand, P. [1 ]
Argenson, J. -N. [1 ]
Parratte, S. [1 ]
机构
[1] Ctr Hosp Univ Sud, Inst Mouvement & Appareil Locomoteur, Hop St Marguerite, Grp Interdisciplinaire Biomecan,UMR CNRS AMU 787, Blvd St Marguerite, F-13009 Marseille, France
[2] Newclip Tech, F-44115 Haute Goulaine, France
关键词
Medial tibiofemoral osteoarthritis; High tibial osteotomy; Opening-wedge osteotomy; Patient-specific surgical guides; 3D printing; CLOSING-WEDGE; KNEE; OSTEOARTHRITIS; FIXATION; PLATE; SLOPE;
D O I
10.1016/j.otsr.2016.11.020
中图分类号
R826.8 [整形外科学]; R782.2 [口腔颌面部整形外科学]; R726.2 [小儿整形外科学]; R62 [整形外科学(修复外科学)];
学科分类号
摘要
Introduction: Treatment of medial tibiofemoral osteoarthritis with a high-tibial osteotomy (HTO) is most effective when the optimal angular correction is achieved. However, conventional instrumentation is limited when multiplanar correction is needed. Hypothesis: Use of patient-specific cutting guides (PSCGs) for HTO provides an accurate correction (difference < 2) relative to the preoperative planning. Materials and methods: Between February 2014 and February 2015, 10 patients (mean age: 46 years [range: 31-59]; grade 1 or 2 osteoarthritis in Ahlback's classification) were included prospectively in this reliability and safety study. All patients were operated using the same medial opening-wedge osteotomy technique. Preoperative planning was based on long-leg radiographs and CT scans with 3D reconstruction. The PSGCs were used to align the osteotomy cut and position the screw holes for the plate. The desired correction was achieved in the three planes when the holes on the plate were aligned with the holes drilled based on the PSCG. Preoperatively, the mean HKA angle was 171.9 degrees (range: 166-179 degrees), the mean proximal tibial angle was 87 degrees (86-88 degrees) and the mean tibial slope was 7.8 degrees (1-22 degrees). The postoperative correction was compared to the planned correction using 3D CT scan transformations. Intraoperative and postoperative complications were assessed at a minimum follow-up of 1 year. Results: The procedure was successfully carried out in all patients with the PSCGs. On postoperative long leg radiographs, the mean HKA was 182.3 degrees ( 180-185 degrees); on the CT scan, the mean tibial mechanical angle was 94 degrees (90-98 degrees) and the mean tibial slope was 7.1 (4-11 degrees). In 19 out of 20 postoperative HKA and slope measurements, the difference between the planned and achieved correction was < 2 based on the 3D analysis of the three planes in space; in the other case, the slope was 13 instead of the planned 10. The intra-class correlation coefficients between the postoperative and planned parameters were 0.98 degrees [0.92-0.99 degrees] for the HKA and 0.96 degrees [0.79-0.99 degrees] for the tibial slope. There were no surgical site infections; one patient had a postoperative hematoma that resolved spontaneously. Discussion: The results of this study showed that use of PSCGs in HTO procedures helps to achieve optimal correction in a safe and reliable manner. (C) 2017 Elsevier Masson SAS. All rights reserved.
引用
收藏
页码:245 / 250
页数:6
相关论文
共 50 条
  • [1] Are three-dimensional patient-specific cutting guides for open wedge high tibial osteotomy accurate? An in vitro study
    Donnez, Mathias
    Ollivier, Matthieu
    Munier, Maxime
    Berton, Philippe
    Podgorski, Jean-Pierre
    Chabrand, Patrick
    Parratte, Sebastien
    [J]. JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH, 2018, 13
  • [2] Are three-dimensional patient-specific cutting guides for open wedge high tibial osteotomy accurate? An in vitro study
    Mathias Donnez
    Matthieu Ollivier
    Maxime Munier
    Philippe Berton
    Jean-Pierre Podgorski
    Patrick Chabrand
    Sébastien Parratte
    [J]. Journal of Orthopaedic Surgery and Research, 13
  • [3] Three-dimensional accuracy of high tibial osteotomy using two generations of CT-based patient-specific guides
    Meier, Patrick
    Aichmair, Alexander
    Kochli, Gian Luca
    Vlachopoulos, Lazaros
    Furnstahl, Philipp
    Fucentese, Sandro F.
    [J]. SWISS MEDICAL WEEKLY, 2017, 147 : 57S - 57S
  • [4] Slope and frontal axis: three-dimensional analysis and correction with patient-specific cutting guides for the proximal tibia
    Imhoff, Florian B.
    Vlachopoulos, Lazaros
    [J]. OPERATIVE ORTHOPADIE UND TRAUMATOLOGIE, 2023, 35 (05): : 248 - 257
  • [5] Three dimensional patient-specific printed cutting guides for closing-wedge distal femoral osteotomy
    JianHui Shi
    Wei Lv
    Yan Wang
    Ben Ma
    Wei Cui
    ZhenZhong Liu
    KeCheng Han
    [J]. International Orthopaedics, 2019, 43 : 619 - 624
  • [6] Three dimensional patient-specific printed cutting guides for closing-wedge distal femoral osteotomy
    Shi, JianHui
    Lv, Wei
    Wang, Yan
    Ma, Ben
    Cui, Wei
    Liu, ZhenZhong
    Han, KeCheng
    [J]. INTERNATIONAL ORTHOPAEDICS, 2019, 43 (03) : 619 - 624
  • [7] Three dimensional-printed patient-specific cutting guides for femoral varization osteotomy: Do it yourself
    Arnal-Burro, Juan
    Perez-Mananes, Ruben
    Gallo-del-Valle, Eudaldo
    Igualada-Blazquez, Cristina
    Cuervas-Mons, Manuel
    Vaquero-Martin, Javier
    [J]. KNEE, 2017, 24 (06): : 1359 - 1368
  • [8] Corrective osteotomy of distal radius malunions using three-dimensional computer simulation and patient-specific guides to achieve anatomic reduction
    Michielsen M.
    Van Haver A.
    Bertrand V.
    Vanhees M.
    Verstreken F.
    [J]. European Journal of Orthopaedic Surgery & Traumatology, 2018, 28 (8) : 1531 - 1535
  • [9] A new three-dimensional patient-specific cutting guide for opening wedge high tibial osteotomy based on ct scan: preliminary in vitro results
    Rosso, Federica
    Rossi, Roberto
    Neyret, Philippe
    Smigielski, Robert
    Menetrey, Jacques
    Bonasia, Davide Edoardo
    Fucentese, Sandro Franco
    [J]. JOURNAL OF EXPERIMENTAL ORTHOPAEDICS, 2023, 10 (01)
  • [10] A new three-dimensional patient-specific cutting guide for opening wedge high tibial osteotomy based on ct scan: preliminary in vitro results
    Federica Rosso
    Roberto Rossi
    Philippe Neyret
    Robert Śmigielski
    Jacques Menetrey
    Davide Edoardo Bonasia
    Sandro Franco Fucentese
    [J]. Journal of Experimental Orthopaedics, 10