The study of ceramic materials system SiC-YAG

被引：0
|
作者：
Tsareva, A. M. [1 ]
Leonov, A. V. [1 ]
Sevostyanov, M. A. [1 ]
Lysenkov, A. S. [1 ]
机构：
[1] RAS, IMET, Baikov Inst Met & Mat Sci, Leninskiy Prospect 49, Moscow, Russia
来源：
FOURTH INTERDISCIPLINARY SCIENTIFIC FORUM WITH INTERNATIONAL PARTICIPATION NEW MATERIALS AND PROMISING TECHNOLOGIES | 2019年 / 525卷
关键词：
SILICON-CARBIDE;
D O I：
10.1088/1757-899X/525/1/012070
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Dense ceramic materials based on SiC with an oxide activating additive YAG by hot pressing at a temperature of 1850 degrees C were obtained. The oxides, melting, fill the space between the SiC particles, contributing to the compaction and mass transfer of the material in the process of hot pressing. It is shown that for a high compaction of the SiC - YAG material, a small amount of oxides is necessary - 9 wt. %
引用
收藏
页数：4
相关论文
共 50 条
  • [1] Hot-Pressed Ceramic SiC-YAG Materials
    Perevislov, S. N.
    Lysenkov, A. S.
    Titov, D. D.
    Tomkovich, M. V.
    INORGANIC MATERIALS, 2017, 53 (02) : 220 - 225
  • [2] Densification of in-situ toughened SiC-YAG composites
    Huang, ZR
    Seong-Jai, C
    Shou-Hong, T
    Jiang, DL
    JOURNAL OF INORGANIC MATERIALS, 1999, 14 (05) : 726 - 732
  • [3] Hot-pressed ceramic SiC–YAG materials
    S. N. Perevislov
    A. S. Lysenkov
    D. D. Titov
    M. V. Tomkovich
    Inorganic Materials, 2017, 53 : 220 - 225
  • [4] SiC-YAG sintered composites from hydroxy hydrogel powder precursors
    Samanta, AK
    Dhargupta, KK
    De, AK
    Ghatak, S
    CERAMICS INTERNATIONAL, 2000, 26 (08) : 831 - 838
  • [5] 原位增韧SiC-YAG复相陶瓷的致密化
    黄政仁
    谭寿洪
    江东亮
    赵诚宰
    无机材料学报, 1999, (05) : 726 - 732
  • [6] SiC-YAG Coating Microstructure Optimization Through Powder Feedstock Manufacturing Process Control
    Perello-Badia, D.
    Espallargas, N.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2024, 33 (04) : 1040 - 1054
  • [7] SiC-YAG陶瓷复合材料的烧结致密性研究
    张宁
    刘欢
    王晓阳
    阚洪敏
    龙海波
    硅酸盐通报, 2015, 34 (08) : 2125 - 2129+2138
  • [8] SiC-YAG Coating Microstructure Optimization Through Powder Feedstock Manufacturing Process Control
    D. Perello-Badia
    N. Espallargas
    Journal of Thermal Spray Technology, 2024, 33 : 1040 - 1054
  • [9] THE COMPATIBILITY OF SIC/SIC COMPOSITES WITH CERAMIC BREEDER MATERIALS
    SAMPLE, T
    FENICI, P
    KOLBE, H
    ORECCHIA, L
    JOURNAL OF NUCLEAR MATERIALS, 1994, 212 : 1529 - 1533
  • [10] Study of molding structures and physicomechanical properties of carbon-ceramic composite materials of the SiC–C system
    S. A. Kolesnikov
    V. V. Konokotin
    G. A. Kravetskii
    Refractories and Industrial Ceramics, 2009, 50 : 276 - 281
12345