Microstructures and cohesiveness of alkali- and heat-treated films on a Ti-15Zr-4Nb-4Ta alloy

被引：1
|
作者：
Kobayashi, S. [1 ]
Murakami, K. [2 ]
Nakai, K. [1 ]
Hino, M. [2 ]
机构：
[1] Ehime Univ, Dept Mat Sci & Engn, 3 Bunkyo Cho, Matsuyama, Ehime 7908577, Japan
[2] Ind Technol Ctr, Okayama 7011296, Japan
来源：
THERMEC 2006, PTS 1-5 | 2007年 / 539-543卷
关键词：
titanium alloy; coating; alkali treatment; heat treatment; scratch test; microstructure;
D O I：
10.4028/www.scientific.net/MSF.539-543.3706
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Microstructures of alkali- and/or heat-treated films on a Ti-15Zr-4Nb-4Ta alloy were analyzed by means of scanning electron microscopy, thin film X-ray diffraction and Auger electron spectroscopy. The cohesiveness of films was also evaluated by scratch tests. The films were formed by immersion in 5M aqueous NaOH solution at 60 degrees C for 86.4 ks (alkali treatment) followed by heating at 400-600 degrees C for 3.6 ks. The film on alloy formed by alkali treatment exhibits the same strucutre as that formed on an alkali-treated titanium. Compositional gradient of alloying elements, Zr, Nb and Ta, is detected in the film. The cohesion of alkali-treated film is considerably increased by the heat treatment, and the maximum cohesion is obtained by heating at 600 degrees C. The increase in cohesion of alkali-treated film by heat treatment is due to both the diffusion of Zr into film and the formation of sodium titanate on substrate.
引用
收藏
页码：3706 / +
页数：2
相关论文
共 50 条
  • [1] Dental application of Ti-15Zr-4Nb-4Ta alloy
    Okazaki, Y
    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 269 - 272
  • [2] A new Ti-15Zr-4Nb-4Ta alloy for medical applications
    Okazaki, Y
    CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2001, 5 (01): : 45 - 53
  • [3] Dental casting properties of Ti-15Zr-4Nb-4Ta alloy
    Okazaki, Y
    MATERIALS TRANSACTIONS, 2002, 43 (12) : 3134 - 3141
  • [4] Decomposition processes of β phase in a Ti-15Zr-4Nb-4Ta alloy
    Kobayashi, S
    Matsuzaki, A
    Nakai, K
    Okazaki, Y
    MATERIALS TRANSACTIONS, 2004, 45 (05) : 1624 - 1628
  • [5] Development of Ti-15Zr-4Nb-4Ta alloy with high biological compatibility
    Okazaki, Y
    Nishimura, E
    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 183 - 186
  • [6] 牙科用铸造Ti-15Zr-4Nb-4Ta合金
    牛金龙
    稀有金属快报, 2005, (12) : 41 - 41
  • [7] Implant applications of highly corrosion-resistant Ti-15Zr-4Nb-4Ta alloy
    Okazaki, Y
    Gotoh, E
    MATERIALS TRANSACTIONS, 2002, 43 (12) : 2943 - 2948
  • [8] Surface analysis of Ti-15Zr-4Nb-4Ta alloy after implantation in rat tibia
    Okazaki, Y
    Nishimura, E
    Nakada, H
    Kobayashi, K
    BIOMATERIALS, 2001, 22 (06) : 599 - 607
  • [9] Preparation of bioactive Ti-15Zr-4Nb-4Ta alloy from HCl and heat treatments after an NaOH treatment
    Yamaguchi, Seiji
    Takadama, Hiroaki
    Matsushita, Tomiharu
    Nakamura, Takashi
    Kokubo, Tadashi
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 2011, 97A (02) : 135 - 144
  • [10] Comparison of fatigue strengths of biocompatible Ti-15Zr-4Nb-4Ta alloy and other titanium materials
    Okazaki, Yoshimitsu
    Gotoh, Emiko
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2011, 31 (02): : 325 - 333
12345