Preparation and electrochemical characteristics of quaternary Li-Mn-V-O spinel as the positive materials for rechargeable lithium batteries

被引:10
|
作者
Kumagai, N [1 ]
Ooto, H [1 ]
Kumagai, N [1 ]
机构
[1] Iwate Univ, Fac Engn, Dept Appl Chem & Mol Sci, Morioka, Iwate 020, Japan
关键词
rechargeable lithium batteries; positive materials; lithium intercalation; manganese oxide; vanadium oxide;
D O I
10.1016/S0378-7753(96)02569-4
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Quaternary Li-Mn-V-O spinels were prepared by heating mixtures of MnCO3, V2O5 and LiNO3 at 700 degrees C for 36 h in ail. The spinel oxides were characterized by X-ray diffraction, FT-a spectroscopic, density and electrochemical measurements. The unit cell volume in a cubic cell increased with an increase in V content in LiVxMn2-xO4 (x=0-0.2), while the amounts of lithium intercalated into the spinels in a high potential region around 4 V versus Li/Li+ decreased considerably with an increase in V content, Furthermore, the thermodynamics and kinetics of the lithium intercalation process into the spinel LinVxMn2-xO4 were studied. The standard free energies of lithium intercalation into the spinels were -291 kJ/mol for x=0 and -264 kJ/mol for x=0.05 at n=0-1 and 25 degrees C. The chemical and self-diffusion coefficients for lithium in LinVxMn2-xO4 spinels were measured as functions of the n and x values by a current-pulse relaxation method. The diffusion coefficients in the spinel with x=0.05 in the n-value range from 0.3 to 1 were about one order of magnitude lower than that in LinMn2O4. (C) 1997 Published by Elsevier Science S.A.
引用
收藏
页码:600 / 603
页数:4
相关论文
共 50 条
  • [41] Novel layered Li-Cr-Ti-O cathode materials for lithium rechargeable batteries
    Zhang, LQ
    Noguchi, H
    ELECTROCHEMISTRY COMMUNICATIONS, 2002, 4 (07) : 560 - 564
  • [42] Synthesis and Electrochemical Characteristics of Li(Ni0.375Mn0.375Co0.25)O2-Li(Li1/3Mn2/3)O2 Cathode Materials for Li Rechargeable Batteries
    Sivaprakash, S.
    Majumder, S. B.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2010, 157 (04) : A418 - A422
  • [43] Regulating Dynamic Electrochemical Interface of LiNi0.5Mn1.5O4 Spinel Cathode for Realizing Simultaneous Mn and Ni Redox in Rechargeable Lithium Batteries
    Lim, Gukhyun
    Shin, Dongki
    Chae, Keun Hwa
    Cho, Min Kyung
    Kim, Chan
    Sohn, Seok Su
    Lee, Minah
    Hong, Jihyun
    ADVANCED ENERGY MATERIALS, 2022, 12 (46)
  • [44] Synthesis and electrochemical studies of spinel Li1.03Mn2O4 cathode materials prepared by a sol-gel method for lithium secondary batteries
    Sun, YK
    SOLID STATE IONICS, 1997, 100 (1-2) : 115 - 125
  • [45] Synthesis and electrochemical characterization of oxysulfide spinel LiAl0.15Mn1.85O3.97S0.03 cathode materials for rechargeable batteries
    Sun, YK
    Oh, B
    Lee, HJ
    ELECTROCHIMICA ACTA, 2000, 46 (04) : 541 - 546
  • [46] Synthesis and electrochemical studies of spinel Li1.03Mn2O4 cathode materials prepared by a sol-gel method for lithium secondary batteries
    Sun, YK
    Kim, DW
    Kim, YR
    Kang, SE
    Lee, KH
    Jin, BS
    Moon, SI
    PROCEEDINGS OF THE SYMPOSIUM ON BATTERIES FOR PORTABLE APPLICATIONS AND ELECTRIC VEHICLES, 1997, 97 (18): : 208 - 214
  • [47] Effect of molybdenum on Li2Mn4O9 for rechargeable lithium ion batteries
    Shaji, K. K.
    Sharmila, S.
    Sushama, George
    Janarthanan, B.
    Chandrasekaran, J.
    IONICS, 2018, 24 (12) : 3725 - 3731
  • [48] Effect of molybdenum on Li2Mn4O9 for rechargeable lithium ion batteries
    K K Shaji
    S Sharmila
    George Sushama
    B Janarthanan
    J Chandrasekaran
    Ionics, 2018, 24 : 3725 - 3731
  • [49] Mechanochemical synthesis of Li-Mn-O spinels: positive electrode for lithium batteries
    Soiron, S
    Rougier, A
    Aymard, L
    Tarascon, JM
    JOURNAL OF POWER SOURCES, 2001, 97-8 : 402 - 405
  • [50] Li-Mn-Co-O shelled LiMn2O4 spinel powder as a positive, electrode material for lithium secondary batteries
    Shui, JL
    Lin, B
    Liu, WL
    Yang, PH
    Jiang, GS
    Chen, CH
    MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2004, 113 (03): : 236 - 241