Barrier layer engineering: Performance Evaluation of E-mode InGaN/AlGaN/GaN HEMT

Impact on DC characteristics of InGaN/AlGaN/GaN HEMT due to variation in the hetero-structure parameters i.e. molar fraction of Al and thickness of AlGaN barrier layer is presented in this paper. Gate controllability over the channel is dependent on barrier layer thickness, and molar fraction has an impact on band offset and 2DEG, which further affects the current. HEMT device that is simulated in SILVACO has InGaN cap layer of 2 nm thickness with 15% In molar fraction, variation of Al percentage and thickness of the AlGaN barrier layer are taken as 15-45% and 5-20nm, respectively. A tremendous change in threshold voltage (V-th), maximum transconductance (G(mmax)) and subthreshold swing is found due to variation in hetero- structure parameter of barrier layer and the values are typically 1.3-0.1 V, 0.6-0.44 S/mm and 75- 135 mV/dec respectively.