Controlling the Defects of Paint Shop using Seven Quality Control Tools in an Automotive Factory

被引：0

作者：

Memon, Imdad Ali ^{[1
]}

Ali, Ahmed ^{[2
]}

Memon, Munawar Ayaz ^{[3
]}

Rajput, Umair Ahmed ^{[1
]}

Abro, Saeed Ahmed Khan ^{[2
]}

Memon, Ahsan Ali ^{[1
]}

机构：

[1] Quaid E Awam Univ Engn Sci & Technol, Dept Mech Engn, Nawabshah, Pakistan

[2] Sukkur IBA Univ, Dept Elect Engn, Sukkur, Pakistan

[3] Quaid E Awam Univ Engn Sci & Technol, Dept Elect Engn, Nawabshah, Pakistan

来源：

ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH | 2019年 / 9卷 / 06期

关键词：

defects reduction; productivity improvement; paint shop; 7QC tools; IMPROVEMENT;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Seven quality control (7QC) tools are used for reducing defects during manufacturing. These tools are highly effective in productivity and quality improvement. In this case, the study of the 7QC tools was applied in an automotive factory in order to reduce paint shop defects. Within four months the production line was inspected, defects were categorized and the 7QC tools were successfully applied, reducing the overall defect rate by 70%. Although every tool was important, the cause and effect diagram was responsible for finding the root causes of the defects.

引用

页码：5062 / 5065

页数：4

共 50 条

[1] Predicting Enamel Layer Defects in an Automotive Paint Shop
Salcedo-Hernandez, Javier
Garcia-Barruetabena, Jon
Pastor-Lopez, Iker
Sanz-Urquijo, Borja
IEEE ACCESS, 2020, 8 : 22748 - 22757
[2] Quality/Quantity Improvement in an Automotive Paint Shop: A Case Study
Arinez, Jorge
Biller, Stephan
Meerkov, Semyon M.
Zhang, Liang
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, 2010, 7 (04) : 755 - 761
[3] A Case Study on First Time Quality Feature Investigation for an Automotive Paint Shop
Fan, Hua-Tzu
Xiao, Guoxian
Arinez, Jorge
Coulthard, Mike
MANUFACTURING LETTERS, 2022, 33 : 919 - 926
[4] A Case Study on First Time Quality Feature Investigation for an Automotive Paint Shop
Fan, Hua-Tzu
Xiao, Guoxian
Arinez, Jorge
Coulthard, Mike
MANUFACTURING LETTERS, 2022, 33 : 919 - 926
[5] Manufacturing system design to improve quality buy rate: An automotive paint shop application study
Li, Jingshan
Blumenfeld, Dennis E.
Marin, Samuel P.
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, 2007, 4 (01) : 75 - 79
[6] Quality Control System using Simple Implementation of Seven Tools for Batik Textile Manufacturing
Suryoputro, Muhammad Ragil
Sugarindra, Muchamad
Erfaisalsyah, Hendy
5TH INTERNATIONAL CONFERENCE ON MANUFACTURING, OPTIMIZATION, INDUSTRIAL AND MATERIAL ENGINEERING, 2017, 215
[7] A case study of the body shop design in an automotive factory using 3D simulation
Moon, D. H.
Cho, H. I.
Kim, H. S.
Sunwoo, H.
Jung, J. Y.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 2006, 44 (18-19) : 4121 - 4135
[8] A Data-Driven Method for Paint Curing Quality Control in Automotive Industry
Ayaz, Gokalp
Uresin, Ugur
IECON 2021 - 47TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2021,
[9] Proactive Quality Paint Thickness Control Using ANFIS
Radfar, Reza
Ghoreishi, Felora
Jassbi, Javad
Khanmohammadi, Sohrab
Alborzi, Mahmood.
2010 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN AND CYBERNETICS (SMC 2010), 2010,
[10] Optimization of process factors for controlling defects due to melt shop using Taguchi method
Kumar, Sushil
Satsangi, P.
Prajapati, D.
INTERNATIONAL JOURNAL OF QUALITY & RELIABILITY MANAGEMENT, 2013, 30 (01) : 4 - +

← 1 2 3 4 5 →