Low temperature ion nitriding of Ti-6Al-4V alloy

被引：0
|
作者：
Agzamov, R. D. [1 ]
Ramazanov, K. N. [1 ]
Tagirov, A. F. [1 ]
Vardanyan, E. L. [1 ]
机构：
[1] Ufa State Aviat Tech Univ, Dept Mech Engn, Ul Karla Marksa 12, Ufa, Russia
来源：
5TH INTERNATIONAL CONGRESS ON ENERGY FLUXES AND RADIATION EFFECTS 2016 | 2017年 / 830卷
关键词：
D O I：
10.1088/1742-6596/830/1/012066
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
The paper presents the results of nitriding the titanium alloy VT6 (Ti-6Al-4V) in a non-self-maintained high-current discharge and in a glow discharge in different regimes. Nitriding was conducted in pure nitrogen and in the mixture of nitrogen and argon. It is shown that microhardness of the samples increased; however, the efficiency of surface modification depends on the modification conditions.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Investigation of low-temperature ion nitriding technology of titanium alloy Ti-6Al-4V
    Agzamov, R. D.
    Ramazanov, K. N.
    Tagirov, A. F.
    Vardanyan, E. L.
    Shulakov, K. K.
    [J]. 24TH INTERNATIONAL CONFERENCE ON VACUUM TECHNIQUE AND TECHNOLOGY, 2017, 872
  • [2] Structural Phase Transformations in Titanium Alloy Ti-6Al-4V at Low-Temperature Ion Nitriding
    Ramazanov, Kamil
    Khusainov, Yuldash
    Nikolaev, Aleksei
    Agzamov, Rashid
    Tagirov, Ainur
    Zolotov, Ilia
    [J]. PROCEEDINGS OF THE 2018 28TH INTERNATIONAL SYMPOSIUM ON DISCHARGES AND ELECTRICAL INSULATION IN VACUUM (ISDEIV 2018), VOL 2, 2018, : 709 - 712
  • [3] Ion nitriding of a commercially pure titanium alloy and of a Ti-6Al-4V
    Fare, S.
    Lecis, N.
    Vedani, M.
    Vimercati, G.
    Silipigni, A.
    Corti, D.
    Favoino, P.
    [J]. METALLURGIA ITALIANA, 2010, (06): : 13 - 18
  • [4] Laser gas nitriding of Ti-6Al-4V alloy
    Xue, L
    Islam, MU
    Koul, AK
    Wallace, W
    Bibby, M
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 1997, 12 (05) : 799 - 817
  • [5] Low temperature ion nitriding titanium alloy TI-6AL-4V in the coarse grained and ultrafine-grained states
    Khusainov, Yu G.
    Agzamov, R. D.
    Ramazanov, K. N.
    Nikolaev, A. A.
    Esipov, R. S.
    Tagirov, A. F.
    Zolotov, I. V.
    [J]. 6TH INTERNATIONAL CONGRESS ENERGY FLUXES AND RADIATION EFFECTS, 2018, 1115
  • [6] Laser surface nitriding of Ti-6Al-4V titanium alloy
    Masse, JE
    Mathieu, JF
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 1996, 11 (02) : 207 - 214
  • [7] Laser surface nitriding of Ti-6Al-4V titanium alloy
    ENSAM, Aix-en-Provence, France
    [J]. Mater Manuf Process, 2 (207-214):
  • [8] MECHANISM OF RF PLASMA NITRIDING OF TI-6AL-4V ALLOY
    RAVEH, A
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1993, 167 (1-2): : 155 - 164
  • [9] Surface properties of Ti-6Al-4V alloy treated by plasma ion nitriding process
    Balasubramanian, K.
    Bragadeesvaran, S. R.
    Adarsh, S. Ajay
    Baranitharan, M.
    Gokulakrishnan, K.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 957 - 961
  • [10] Effect of severe shot peening and ultra-low temperature plasma nitriding on Ti-6Al-4V alloy
    Unal, Okan
    Maleki, Erfan
    Varol, Remzi
    [J]. VACUUM, 2018, 150 : 69 - 78
12345