Maximum output control of photovoltaic (PV) array

A photovoltaic (PV) system output depends on the environmental parameters such as the solar insolation and the PV module temperature. If it is possible to predict the maximum power point under the outdoor environment and to operate at that point, the PV system can generate the maximum output every time. In this paper, a maximum power point control method that maximizes the output of a PV array is proposed. This method determines. the maximum output operation point from the I-V characteristics introducing empirically the effects of the solar insolation and the module temperature. We derived two main parameters from this analysis; one is the power gain G, and another is the environmental operation parameter X. At the operation point determined by this method, G becomes larger than that of under the same environmental conditions. G becomes large with the increase of X, and the large X manly means the low solar insolation. The characteristics of PV module which will supply mom power especially at large X should satisfy the following points; the fill factor of the module should be lower and the short circuit current of the module should be larger than those of currently available in the market.