FINITE ELEMENT ANALYSIS OF THE GEOMETRY OF THE TOOLS USED FOR THE CUP DRAWING PROCESS

被引：0
|
作者：
Iordache, Monica [1 ]
机构：
[1] Univ Pitesti Romania, Dept Technol & Management, Pitesti, Romania
来源：
PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE MODERN TECHNOLOGIES, QUALITY AND INNOVATION: MODTECH 2009 - NEW FACE OF TMCR | 2009年
关键词：
cup drawing; anisotropic sheet steel; geometry of the tools; simulation MEF; Abaqus; METAL SHEETS;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The plastic strain procedure which is largely used in industry is the deep drawing process of sheet steel. Achieving a flawless cupped piece depends mainly on three factors: the characteristics of the sheet steel, the shape of the tools (the radius of the die and of the punch) and the cupping conditions. The simulation of the cupping process by taking into account the three factors which influence it allows one to know even from the designing phase whether a piece with a given configuration can be obtained through the cupping process or not. In this study we present the influence of the geometry of the die on some parameters of the cup drawing process of the anisotropic sheet steel. The results are obtained through the MEF simulation of the cup drawing process with the help of the ABAQUS programme.
引用
收藏
页码：339 / 342
页数：4
相关论文
共 50 条
  • [1] FINITE ELEMENT ANALYSIS OF WRINKLING DURING CUP DRAWING
    Neto, D. M.
    Barros, P. D.
    Oliveira, M. C.
    Alves, J. L.
    Menezes, L. F.
    [J]. 11TH WORLD CONGRESS ON COMPUTATIONAL MECHANICS; 5TH EUROPEAN CONFERENCE ON COMPUTATIONAL MECHANICS; 6TH EUROPEAN CONFERENCE ON COMPUTATIONAL FLUID DYNAMICS, VOLS II - IV, 2014, : 4210 - 4222
  • [2] A study of the finite element stabilized matrix to the hemispherical cup-drawing process
    Lu, YH
    [J]. COMPUTERS & STRUCTURES, 1996, 60 (02) : 235 - 242
  • [3] Finite-element simulation of the elliptical cup deep drawing process by sheet hydroforming
    Hama, Takayuki
    Hatakeyama, Tomohiro
    Asakawa, Motoo
    Amino, Hiroyuki
    Makinouchi, Akitake
    Fujimoto, Hitoshi
    Takuda, Hirohiko
    [J]. FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2007, 43 (03) : 234 - 246
  • [4] FINITE-ELEMENT ANALYSIS OF THE REVERSE DRAWING PROCESS
    CANNIZZARO, L
    MICARI, F
    LADIEGA, SN
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1990, 24 : 441 - 450
  • [5] Tube drawing process modelling by a finite element analysis
    Palengat, M.
    Chagnon, G.
    Millet, C.
    Favier, D.
    [J]. NUMIFORM '07: MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS I AND II, 2007, 908 : 705 - +
  • [6] Tube Drawing Process Modelling By A Finite Element Analysis
    Palengat, M.
    Guiraud, O.
    Millet, C.
    Chagnon, G.
    Favier, D.
    [J]. MEDICAL DEVICE MATERIALS IV, 2008, : 65 - +
  • [7] Cup drawing of pure titanium sheet - finite element analysis and experimental validation
    Kuwabara, T
    Katami, C
    Kikuchi, M
    Shindo, T
    Ohwue, T
    [J]. SIMULATION OF MATERIALS PROCESSING: THEORY, METHODS AND APPLICATIONS, 2001, : 781 - 787
  • [8] Modelling and Simulation of Deep Drawing Process of Circular Cup on AL1200 Using Finite Element Analysis
    Sahu, Y. K.
    Pradhan, M. K.
    [J]. ADVANCES IN SIMULATION, PRODUCT DESIGN AND DEVELOPMENT, 2020, : 29 - 42
  • [9] Investigation into wrinkling behavior in the elliptical cup deep drawing process by finite element analysis using bifurcation theory
    Kim, JB
    Yoon, JW
    Yang, DY
    Barlat, F
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 111 (1-3) : 170 - 174
  • [10] ANALYSIS OF CUP-DRAWING PROCESS
    WOO, DM
    [J]. JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1964, 6 (02): : 116 - &
12345