Application of computational fluid dynamics to closed-loop bioreactors: II. Simulation of biological phosphorus removal using computational fluid dynamics

被引:16
|
作者
Littleton, Helen X.
Daigger, Glen T.
Strom, Peter F.
机构
[1] Rutgers State Univ, Dept Environm Sci, CDM, Penn Ctr 2, Philadelphia, PA 19102 USA
[2] CH2M Hill Inc, Englewood, CO USA
[3] Rutgers State Univ, Dept Environm Sci, Piscataway, NJ 08855 USA
关键词
nutrient removal; phosphorus; simultaneous; heterogeneous; computational fluid dynamics; oxidation ditch;
D O I
10.2175/106143006X136748
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Based on the International Water Association's (London) Activated Sludge Model No. 2 (ASM2), biochemistry rate expressions for general heterotrophs and phosphorus-accumulating organisms (PAOs) were introduced to a previously developed, three-dimensional computational fluid dynamics (CFD) activated sludge model that characterized the mixing pattern within the outer channel of a full-scale, closed-loop bioreactor. Using acetate as the sole carbon and energy source, CFD simulations for general heterotrophs or PAOs individually agreed well with those of ASM2 for a chemostat with the same operating conditions. Competition between and selection of heterotrophs and PAOs was verified using conventional completely mixed and tanks-in-series models. Then, competition was studied in the CFD model. These results demonstrated that PAOs and heterotrophs can theoretically coexist in a single bioreactor when the oxygen input is appropriate to allow sufficient low-dissolved-oxygen zones to develop.
引用
收藏
页码:613 / 624
页数:12
相关论文
共 50 条
  • [1] Application of computational fluid dynamics to closed-loop bioreactors: I. Characterization and simulation of fluid-flow pattern and oxygen transfer
    Littleton, Helen X.
    Daigger, Glen T.
    Storm, Peter F.
    [J]. WATER ENVIRONMENT RESEARCH, 2007, 79 (06) : 600 - 612
  • [2] COMPUTATIONAL FLUID-DYNAMICS SIMULATION OF BIOREACTORS
    HJERTAGER, BH
    MORUD, K
    [J]. MODELING IDENTIFICATION AND CONTROL, 1995, 16 (04) : 177 - 191
  • [3] Optimization Design of Closed-Loop Thermosyphons: Experimentation and Computational Fluid Dynamics Modeling
    Ritthong, Natthakit
    Thongkom, Sommart
    Sawisit, Apichai
    Duangsa, Boonyabhorn
    Ritthong, Wirote
    [J]. ENERGIES, 2024, 17 (02)
  • [4] Computational Fluid Dynamics of Mixing in Aerated Bioreactors
    Teng, Emily Liew Wan
    Kumar, Perumal
    Samyudia, Yudi
    [J]. BIOLOGY, ENVIRONMENT AND CHEMISTRY, 2011, : 17 - 22
  • [5] Co-simulation of hypertensive left ventricle based on computational fluid dynamics and a closed-loop network model
    Zuo, Xiaowen
    Xu, Zhike
    Jia, Huaping
    Mu, Yang
    Zhang, Mingming
    Yuan, Manli
    Wu, Chengwei
    [J]. COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE, 2022, 216
  • [6] Flow Characterization in Wave Bioreactors Using Computational Fluid Dynamics
    Oncuel, Alper A.
    Genzel, Yvonne
    Reichl, Udo
    Thevenin, Dominique
    [J]. PROCEEDINGS OF THE 21ST ANNUAL MEETING OF THE EUROPEAN SOCIETY FOR ANIMAL CELL TECHNOLOGY (ESACT), 2009, 2012, 5 : 455 - 469
  • [7] COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF FLUID MIXING IN SINGLE USE BIOREACTORS
    Spall, Robert
    Jones, Nephi
    Staheli, Clinton
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2010, VOL 7, PTS A AND B, 2012, : 843 - 850
  • [8] COMPUTATIONAL FLUID DYNAMICS: COMPUTER SIMULATION
    Navthar, R. R.
    Kotakar, S. G.
    Khire, M. Y.
    [J]. 2011 3RD INTERNATIONAL CONFERENCE ON COMPUTER TECHNOLOGY AND DEVELOPMENT (ICCTD 2011), VOL 2, 2012, : 347 - 351
  • [9] Computational Fluid Dynamics Simulation for Propeller
    Almazo, Diego
    Rodriguez Jorge, Ricardo
    Mizera-Pietraszko, Jolanta
    [J]. ADVANCES IN DIGITAL TECHNOLOGIES, 2017, 295 : 162 - 168
  • [10] Simulation of ingots by computational fluid dynamics
    Dos Reis, Marcus Vinicius Filgueiras
    Lucianetti, Rodrigo Machado
    Tasca, Rodrigo José
    De Andrade, Sidmei Oswaldo Costa
    De Araújo Filho, Glailson Mattos
    Maliska, Clovis Raimundo
    [J]. Metalurgia e Materiais, 2002, 58 (528): : 816 - 818