Interfaces for Thomson scattering diagnostics in the Divertor and SOL near the X-point plasmas of ITER-feat

ITER design has highlighted the fundamental need to monitor and deepen understanding of divertor operations. The designed Thomson scattering (TS) for the divertor leg and SOL near the X-point, has gained a lot from present State-of-the-Art in the diagnostics. However, hostile environment, very restricted access, and required spatial resolution, all impose severe constraints on the diagnostic design for ITER. Signal transmission from diagnostics introduces the further considerations of relative movements of the machine components. Despite the constraints it is feasible using of crossed probe and viewing beams to make measurements of the electron temperature and density profiles in outer divertor leg at the extent from the strike-point to X-point vicinity, and the LIDAR TS technique to make the electron temperature and density scan along the major radial line-of-sight at similar to0.5m above the X-point. The interfaces for each of the subsystems are presented and discussed in the sections below.