Model for evolution of grain size in the rim region of high burnup UO2 fuel

被引:10
|
作者
Xiao, Hongxing [1 ]
Long, Chongsheng [1 ]
Chen, Hongsheng [1 ]
机构
[1] Nucl Power Inst China, Sci & Technol Reactor Fuel & Mat Lab, Chengdu, Peoples R China
基金
中国国家自然科学基金;
关键词
Model; High burnup; Subdivided grain; Rim structure; UO2; fuel; IRRADIATION-INDUCED RECRYSTALLIZATION; TRANSMISSION ELECTRON-MICROSCOPY; FISSION-PRODUCT BEHAVIOR; THERMAL-CONDUCTIVITY; DISLOCATION DENSITY; LATTICE-PARAMETER; GAS BEHAVIOR; NUCLEAR-FUEL; UP STRUCTURE; RE-SOLUTION;
D O I
10.1016/j.jnucmat.2016.01.006
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The restructuring process of the high burnup structure (HBS) formation in UO2 fuel results in sub-micron size grains that accelerate the fission gas swelling, which will raise some concern over the safety of extended the nuclear fuel operation life in the reactor. A mechanistic and engineering model for evolution of grain size in the rim region of high burnup UO2 fuel based on the experimental observations of the HBS in the literature is presented. The model takes into account dislocations evolution under irradiation and the grain subdivision occur successively at increasing local burnup. It is assumed that the original driving force for subdivision of grain in the HBS of UO2 fuel is the production and accumulation of dislocation loops during irradiation. The dislocation loops can also be annealed through thermal diffusion when the temperature is high enough. The capability of this model is validated by the comparison with the experimental data of temperature threshold of subdivision, dislocation density and sub-grain size as a function of local burnup. It is shown that the calculated results of the dislocation density and subdivided grain size as a function of local burnup are in good agreement with the experimental results. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:74 / 79
页数:6
相关论文
共 50 条
  • [1] OXYGEN POTENTIAL IN THE RIM REGION OF HIGH BURNUP UO2 FUEL
    MATZKE, H
    JOURNAL OF NUCLEAR MATERIALS, 1994, 208 (1-2) : 18 - 26
  • [2] DEVELOPMENT AND CHARACTERISTICS OF THE RIM REGION IN HIGH BURNUP UO2 FUEL PELLETS
    CUNNINGHAM, ME
    FRESHLEY, MD
    LANNING, DD
    JOURNAL OF NUCLEAR MATERIALS, 1992, 188 : 19 - 27
  • [3] Pore pressure and swelling in the rim region of LWR high burnup UO2 fuel
    Koo, YH
    Lee, BH
    Cheon, JS
    Sohn, DS
    JOURNAL OF NUCLEAR MATERIALS, 2001, 295 (2-3) : 213 - 220
  • [4] Critical assessment of the pore size distribution in the rim region of high burnup UO2 fuels
    Cappia, F.
    Pizzocri, D.
    Schubert, A.
    Van Uffelen, P.
    Paperini, G.
    Pellottiero, D.
    Macian-Juan, R.
    Rondinella, V. V.
    JOURNAL OF NUCLEAR MATERIALS, 2016, 480 : 138 - 149
  • [5] Rim characteristics and their effects on the thermal conductivity in high burnup UO2 fuel
    Lee, BH
    Koo, YH
    Sohn, DS
    JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 2001, 38 (01) : 45 - 52
  • [6] Modeling of the rim effect on thermal behavior of high-burnup UO2 fuel
    Lee, BH
    Koo, YH
    Sohn, DS
    NUCLEAR TECHNOLOGY, 1999, 127 (02) : 151 - 159
  • [7] An electron microscopy study of the RIM structure of a UO2 fuel with a high burnup of 7.9% FIMA
    Ray, ILF
    Matzke, H
    Thiele, HA
    Kinoshita, M
    JOURNAL OF NUCLEAR MATERIALS, 1997, 245 (2-3) : 115 - 123
  • [8] Development of the MFPR/R code for characterization of the rim zone and high burnup structure evolution in UO2 fuel pellets
    Tarasov, V. I.
    Polovnikov, P. V.
    Shestak, V. E.
    Veshchunov, M. S.
    JOURNAL OF NUCLEAR MATERIALS, 2019, 517 : 214 - 224
  • [9] High resolution TEM of high burnup UO2 fuel
    Nogita, K
    Une, K
    JOURNAL OF NUCLEAR MATERIALS, 1997, 250 (2-3) : 244 - 249
  • [10] Rim structure formation and high burnup fuel behavior of large-grained UO2 fuels
    Une, K
    Hirai, M
    Nogita, K
    Hosokawa, T
    Suzawa, Y
    Shimizu, S
    Etoh, Y
    JOURNAL OF NUCLEAR MATERIALS, 2000, 278 (01) : 54 - 63