The effect of pulse waveforms on surface morphology, composition and corrosion behavior of Al2O3 and Al2O3/TiO2 nano-composite PEO coatings on 7075 aluminum alloy

被引:63
|
作者
Hakimizad, Amin [1 ]
Raeissi, Keyvan [1 ]
Golozar, Mohammad Ali [1 ]
Lu, Xiaopeng [2 ,3 ]
Blawert, Carsten [2 ]
Zheludkevich, Mikhail L. [2 ]
机构
[1] Isfahan Univ Technol, Dept Mat Engn, Esfahan 8415683111, Iran
[2] Helmholtz Zentrum Geesthacht, Inst Mat Res, Max Planck Str 1, D-21502 Geesthacht, Germany
[3] Northeastern Univ, Sch Mat Sci & Engn, Educ Minist China, Key Lab Anisotropy & Texture Mat, 3-11 Wenhua Rd, Shenyang 110819, Liaoning, Peoples R China
来源
关键词
Plasma electrolytic oxidation; Composite coatings; Surface morphology; Corrosion; Pulse waveforms; Titania nano-particle; PLASMA ELECTROLYTIC OXIDATION; MICRO-ARC OXIDATION; MG ALLOY; CERAMIC COATINGS; MAGNESIUM ALLOY; OXIDE LAYER; LI ALLOY; MICROSTRUCTURE; RESISTANCE; PERFORMANCE;
D O I
10.1016/j.surfcoat.2017.05.068
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Plasma electrolytic oxidation was employed to produce Al2O3 and Al2O3/TiO2 composite coatings from a silicate based electrolyte on 7075 aluminum alloy using unipolar and bipolar waveforms with cathodic duty cycle of 20 and 40%. The results showed that the surface morphology of the coatings is dependent on the applied waveform. Pancake like morphology was converted to crater like by altering waveform from unipolar to bipolar. Higher thickness, lower porosity, and thus, higher corrosion protection were achieved using the bipolar waveform at higher cathodic duty cycle of 40%. The incorporation of TiO2 nano-particles in the coatings decreased the thickness, increased the micro-cracks and widened the micro-pores on coating surface when unipolar waveform was applied. It was found that TiO2 nano-particles have been incorporated into the coatings in their original crystalline structure, i.e. rutile, which was categorized in the "inert incorporation" mode and this incorporation has not changed the matrix micro-structure, i.e.)gamma-alumina. In addition, the incorporated amounts of TiO2 nano-particles were constant and showed no reasonable relation with the applied waveform. The corrosion results indicated that although the composite coating produced at unipolar waveform shows the highest corrosion resistance at short periods of immersion due to repairing mechanism, it degrades at a higher rate. However, for the composite coatings produced using the bipolar waveform with the higher cathodic duty cycle of 40%, the maximum corrosion protection was achieved at long term immersion. Repairing mechanism is plugging the micro-pores in the inner compact layer which Was found more effective for the coatings with lower porosity. Accordingly, it was concluded that the corrosion protection of the coatings with higher "intrinsic resistance" get more benefit from the repairing mechanism too. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:208 / 221
页数:14
相关论文
共 50 条
  • [1] The corrosion and tribocorrosion resistance of PEO composite coatings containing α-Al2O3 particles on 7075 Al alloy
    Ghafaripoor, Masoud
    Raeissi, Keyvan
    Santamaria, Monica
    Hakimizad, Amin
    SURFACE & COATINGS TECHNOLOGY, 2018, 349 : 470 - 479
  • [2] Influence of cathodic duty cycle on the properties of tungsten containing Al2O3/TiO2 PEO nano-composite coatings
    Hakimizad, Amin
    Raeissi, Keyvan
    Golozar, Mohammad Ali
    Lu, Xiaopeng
    Blawert, Carsten
    Zheludkevich, Mikhail L.
    SURFACE & COATINGS TECHNOLOGY, 2018, 340 : 210 - 221
  • [3] Effect of rupture of amorphous Al2O3 layer in Al/Al2O3 nano-composite on mechanical properties
    Yang, Zhiqing
    He, Lianlong
    Hu, Kuiyi
    Chen, Ji
    Fan, Xueshu
    Cong, Hongtao
    Ye, Hengqiang
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2002, 16 (03): : 225 - 229
  • [4] Al/Al2O3 Nano-Composite Produced by ECAP
    Casati, Riccardo
    Amadio, Matteo
    Biffi, Carlo Alberto
    Dellasega, David
    Tuissi, Ausonio
    Vedani, Maurizio
    PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING VII, 2013, 762 : 457 - +
  • [5] Strengthen mechanism of Al2O3/Al nano-composite
    Cong, HT
    Yang, ZQ
    He, LL
    Lu, K
    ACTA METALLURGICA SINICA, 2003, 39 (03) : 320 - 324
  • [6] Effect of Al2O3 on Microstructure and Corrosion Characteristics of Al/Al2O3 Composite Coatings Prepared by Cold Spraying
    Jiang, Wei
    Shen, Xin
    Wang, Zhiyuan
    Liu, Yang
    Zhang, Xiaohua
    Wang, Enhao
    Zhang, Junxin
    METALS, 2024, 14 (02)
  • [7] Effect of TiO2 on the microstructure and phase composition of Al2O3 and Al2O3-TiO2 APS sprayed coatings
    Michalak, Monika
    Latka, Leszek
    Sokolowski, Pawel
    Candidato, Rolando T., Jr.
    Ambroziak, Andrzej
    BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2021, 69 (02)
  • [8] Surface state of NiO supported on γ-Al2O3 and TiO2/γ-Al2O3 supports
    Wang, J
    Ma, G
    Hu, YH
    Dong, L
    Chen, Y
    CHINESE JOURNAL OF INORGANIC CHEMISTRY, 2001, 17 (01) : 43 - 49
  • [9] Microstructure and Tribocorrosion Behavior of Al2O3/Al Composite Coatings: Role of Al2O3 Addition
    Jiangbo Cheng
    Yunyun Ge
    Bishi Wang
    Lianhua Zhang
    Xianlong Hu
    Shen Hong
    Xiubing Liang
    Xiancheng Zhang
    Journal of Thermal Spray Technology, 2020, 29 : 1741 - 1751
  • [10] Corrosion behavior of Cr-P/nano Al2O3 composite coatings
    Ramezani-Varzaneh, H. A.
    Allahkaram, S. R.
    Faezi-Alivand, R.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (12)