Preparation of monolithic oxynitride glasses by sol-gel method

被引：10

作者：

Ahmadi, Sara ^{[1
]}

Yekta, Bijan Eftekhari ^{[1
]}

Sarpoolaky, Hossein ^{[1
]}

Aghaei, Alireza ^{[2
]}

机构：

[1] Iran Univ Sci & Technol, Dept Mat, Div Ceram, Tehran, Iran

[2] Mat & Energy Res Ctr, Div Ceram, Tehran, Iran

来源：

JOURNAL OF NON-CRYSTALLINE SOLIDS | 2014年 / 404卷

关键词：

Sol gel; Monolithic glass; Oxynitride glass; SILICA AEROGELS; AMMONOLYSIS; NITRIDATION; SYSTEM;

D O I：

10.1016/j.jnoncrysol.2014.07.037

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Monolithic aerogels and xerogels were obtained by drying gels at super critical condition and ambient pressure after aging at room temperature for various lengths of time. Heat treatment of porous xerogels at low temperature (<= 1000 degrees C) in air and flowing ammonia resulted dense, homogeneous oxide and oxynitride glasses, respectively. The chemical bonding state and properties of gels and glasses were investigated employing Fourier transform infrared spectroscopy (FTIR), dilatometry, and Brunauer-Emmitt-Teller (BET) methods. Nitrogen content of oxynitride glasses were determined by oxygen nitrogen analyzer. Based on the compressive strength measurement, the strength of gels was increased from 0.73 to 1.5 (Mpa) with aging time. The pore size distribution was also changed significantly during aging process via hydrolysis and condensation reactions; the latter is confirmed by the FTIR spectra. The dilatometric softening point temperature of glasses and their micro-hardness were increased after nitridation process. Spectroscopic evidence indicated that nitrogen was chemically dissolved in the network of glass and its content was increased from 0.67 to 2.08 (wt.%) after nitridation for 5 and 15 h, respectively. (C) 2014 Elsevier B.V. All rights reserved.

引用

页码：61 / 66

页数：6

共 50 条

[1] PREPARATION OF GLASSES AND CERAMICS BY THE SOL-GEL METHOD
SAKKA, S
NIPPON KAGAKU KAISHI, 1988, (03) : 243 - 252
[2] Preparation and characterisation of monolithic Pr-doped silica glasses by a sol-gel method
Biswas, A
Chakrabarti, S
Acharya, HN
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 1997, 49 (03): : 191 - 196
[3] Preparation and characterisation of monolithic Pr-doped silica glasses by a sol-gel method
Biswas, A.
Chakrabarti, S.
Acharya, H.N.
Materials science & engineering. B, Solid-state materials for advanced technology, 1997, B49 (03): : 191 - 196
[4] PREPARATION OF MONOLITHIC BOROPHOSPHOSILICATE GLASS BY THE SOL-GEL METHOD
CHOU, KS
JOURNAL OF NON-CRYSTALLINE SOLIDS, 1989, 110 (01) : 122 - 124
[5] Preparation of SnO2 Monolithic Gel by Sol-Gel Method
Haruhisa Shiomi
Chisato Kakimoto
Atsushi Nakahira
Shinichi Takeda
Journal of Sol-Gel Science and Technology, 2000, 19 : 759 - 763
[6] Preparation of SnO2 monolithic gel by sol-gel method
Shiomi, H
Kakimoto, C
Nakahira, A
Takeda, S
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2000, 19 (1-3) : 759 - 763
[7] PREPARATION OF GOLD RUBY GLASSES BY THE SOL-GEL METHOD
NAVARRO, JMF
VILLEGAS, MA
GLASTECHNISCHE BERICHTE-GLASS SCIENCE AND TECHNOLOGY, 1992, 65 (02): : 32 - 40
[8] The preparation of CdTe particles in silica glasses by a sol-gel method
Cordoncillo, E.
Carda, J.B.
Guaita, F.J.
Escribano, P.
Key Engineering Materials, 1997, (136 PART 2) : 1389 - 1392
[9] Preparation of CdTe particles in silica glasses by a sol-gel method
Universitat Jaume I, Castellon, Spain
Key Eng Mat, Pt 2 (1389-1392):
[10] THE PREPARATION OF CDS PARTICLES IN SILICA GLASSES BY A SOL-GEL METHOD
CORDONCILLO, E
ESCRIBANO, P
MONROS, G
TENA, MA
ORERA, VM
CARDA, J
JOURNAL OF SOLID STATE CHEMISTRY, 1995, 118 (01) : 1 - 5

← 1 2 3 4 5 →