Erosion-corrosion and corrosion properties of DLC coated low temperature gas-nitrided austenitic stainless steel

被引：31

作者：

Jellesen, Morten S. ^{[1
]}

Christiansen, Thomas L. ^{[1
]}

Hilbert, Lisbeth Rischel ^{[1
]}

Moller, Per ^{[1
]}

机构：

[1] Tech Univ Denmark, Dept Mech Engn, DK-2800 Lyngby, Denmark

来源：

WEAR | 2009年 / 267卷 / 9-10期

关键词：

Erosion-corrosion; Stainless steel; Expanded austenite; DLC coatings; COATINGS; RESISTANCE; CARBON;

D O I：

10.1016/j.wear.2009.06.038

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Low temperature nitriding of stainless steel leads to the formation of a surface zone of so-called expanded austenite, i.e. by dissolution of large amounts of nitrogen in solid solution. In the present work the possibility of using nitrogen expanded austenite "layers" obtained by gaseous nitriding of AISI 316 as substrate for DLC coatings are investigated. Corrosion and erosion-corrosion measurements were carried out on low temperature nitrided stainless steel AISI 316 and on low temperature nitrided stainless steel AISI 316 with a top layer of DLC. The combination of DLC and low temperature nitriding dramatically reduces the amount of erosion-corrosion of stainless steel under impingement of particles in a corrosive medium. (C) 2009 Elsevier B.V. All rights reserved.

引用

页码：1709 / 1714

页数：6

共 50 条

[1] Cavitation erosion and erosion-corrosion resistance of austenitic stainless steel by plasma transferred arc welding
Zhang, S.
Wang, S.
Wu, C. L.
Zhang, H.
Guan, M.
Tan, J. Z.
[J]. ENGINEERING FAILURE ANALYSIS, 2017, 76 : 115 - 124
[2] Investigations on the Corrosion Behaviour and Structural Characteristics of Low Temperature Nitrided and Carburised Austenitic Stainless Steel
D. Mnter
H.-J. Spies
H. Biermann
Chr. Eckstein
[J]. 材料热处理学报, 2004, (05) : 311 - 315
[3] Investigations on the corrosion behaviour and structural characteristics of low temperature nitrided and carburised austenitic stainless steel
Münter, D
Spies, HJ
Biermann, H
Eckstein, C
[J]. 14TH CONGRESS OF INTERNATIONAL FEDERATION FOR HEAT TREATMENT AND SURFACE ENGINEERING, VOLS 1 and 2, PROCEEDINGS, 2004, : 311 - 315
[4] Corrosion properties of active screen plasma nitrided 316 austenitic stainless steel
Li, CX
Bell, T
[J]. CORROSION SCIENCE, 2004, 46 (06) : 1527 - 1547
[5] Erosion-corrosion behavior of 2205 duplex stainless steel in wet gas environments
Wang, Luntao
Xing, Yunying
Liu, Zhiyong
Zhang, Dawei
Du, Cuiwei
Li, Xiaogang
[J]. JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING, 2016, 35 : 928 - 934
[6] Improvement of erosion and erosion-corrosion resistance of AISI420 stainless steel by low temperature plasma nitriding
Xi, Yun-tao
Liu, Dao-xin
Han, Dong
[J]. APPLIED SURFACE SCIENCE, 2008, 254 (18) : 5953 - 5958
[7] Erosion-corrosion resistance properties of 316L austenitic stainless steels after low-temperature liquid nitriding
Zhang, Xiangfeng
Wang, Jun
Fan, Hongyuan
Pan, Dong
[J]. APPLIED SURFACE SCIENCE, 2018, 440 : 755 - 762
[8] Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
Mareci, Daniel
Strugaru, Sorin Iacob
Munteanu, Corneliu
Bolat, Georgiana
Souto, Ricardo M.
[J]. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2015, 106 (03) : 267 - 274
[9] Improving the erosion-corrosion resistance of AISI 316 austenitic stainless steel by low-temperature plasma surface alloying with N and C
Dong, H.
Qi, P. -Y
Li, X. Y.
Liewellyn, R. J.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 431 (1-2): : 137 - 145
[10] Influence of microstructure on the erosion and erosion-corrosion characteristics of 316 stainless steel
Wood, R. J. K.
Walker, J. C.
Harvey, T. J.
Wang, S.
Rajahram, S. S.
[J]. WEAR, 2013, 306 (1-2) : 254 - 262

← 1 2 3 4 5 →