Design Optimization and Experiment of Spring-tooth Drum Type Picking Device for Vegetable Soybean Harvester

被引：0
|
作者：
Liu Z. [1 ,2 ]
Jin C. [1 ]
Yuan W. [1 ]
Feng Y. [1 ]
Yuan J. [2 ]
机构：
[1] Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing
[2] School of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2022年 / 53卷 / 12期
关键词：
parameter optimization; picking devices; response surface test; spring-tooth drum; vegetable soybeans;
D O I：
10.6041/j.issn.1000-1298.2022.12.016
中图分类号：
学科分类号：
摘要：
To solve the problems of high labor intensity, low efficiency of manual picking, and lack of corresponding harvesting machinery and equipment for vegetable soybean harvesting, a spring-tooth drum type vegetable soybean picking device was designed in combination with the physical characteristics of vegetable soybean plants and the planting mode. The working principle of the spring-tooth drum picking device was expounded, the parameter design and structure optimization of the key components of the device were carried out, the kinematic of the pod was analyzed, and the factors affecting the operation effect were determined. The range of key parameters was determined and narrowed by a single factor test. Taking forward speed, drum rotation speed, and header height as test factors, and using drop rate, hanging rate, and breakage rate as experimental indicators, a three-factor and five-level second orthogonal rotation center combination test was carried out. The mathematical model between the experimental factors and the experimental indicators was established and the influence of each factor on the experimental indicators was analyzed. The model was optimized by particle swarm optimization, and the predicted optimal parameter combination was as follows; forward speed was 0. 43 m/s, drum rotation speed was 245 r/min, header height was 4 cm, and the corresponding predicted values of drop rate, hanging rate, and breakage rate were 10.6%, 4.4%, and 5.6%, respectively. The field verification test was carried out on the optimal parameter combination, and the results showed that the drop rate of the field test was 11. 8%, the hanging rate was 4.0%, and the damage rate was 6. 1% . The relative errors were no more than 10. 1%. The variance analysis showed that there was no significant difference between the actual value and the prediction of the evaluation index. The research results can provide a reference for the further structural design and parameter optimization of the spring-tooth drum vegetable soybean picking device. © 2022 Chinese Society of Agricultural Machinery. All rights reserved.
引用
收藏
页码：171 / 180
页数：9
相关论文
共 30 条
  • [1] LIU Zhiyuan, JIN Chengqian, FENG Yugang, Et al., Current status of soya bean harvest mechanization[J], Journal of Chinese Agricultural Mechanization, 42, 5, pp. 228-236, (2021)
  • [2] QIN Guangming, SONG Zhiyu, XIAO Hongru, Experiment research on performance of 5TD60 green soybean huller, Agricultural Equipment & Technology, 37, 5, pp. 25-26, (2011)
  • [3] WANG Fuyi, Design of 5MDZJ - 380-1400 type green soybean pods picking machine, Agricultural Science & Technology and Equipment, 9, pp. 11-13, (2016)
  • [4] XIA Xianfei, CHEN Qiaomin, XIAO Hongru, Et al., Research on current status and developing strategy of pulses crops mechanized harvesting technology in China[J], Journal of Chinese Agricultural Mechanization, 40, 5, pp. 22-28, (2019)
  • [5] NI Youliang, JIN Chengqian, CHEN Man, Et al., Research progress on mechanized production technology and equipment of soybean in China[J], Journal of Chinese Agricultural Mechanization, 40, 12, pp. 17-25, (2019)
  • [6] DUAN Yilei, KONG Lingjun, CHEN Yongcheng, Et al., Tine drum pepper picking device picking hot pepper mechanical damage characteristics and mechanism [J], Journal of Chinese Agricultural Mechanization, 35, 1, pp. 79-82, (2014)
  • [7] WANG Bokai, GU Fengwei, YU Zhaoyang, Et al., Design and experiment of picking-up mechanism of axial-flow full-feed peanut harvester[J], Transactions of the Chinese Society for Agricultural Machinery, 5 1, 10, pp. 132-141, (2020)
  • [8] LEI Mingju, KONG Lingjun, CHEN Yongcheng, Et al., Research on the chili picking device of spring tooth roller-type [J], Journal of Chinese Agricultural Mechanization, 35, 1, pp. 161-165, (2014)
  • [9] LIU Lei, WU Teng, KONG Fanting, Et al., Optimized design and experiment of the picking mechanism for brush-roller castor harvesters, Transactions of the CSAE, 37, 8, pp. 19-29, (2021)
  • [10] WU Delin, YUAN Jiahao, LI Chao, Et al., Design and experiment of twist-comb end effector for picking camellia fruit [J], Transactions of the Chinese Society for Agricultural Machinery, 52, 4, pp. 21-33, (2021)
123