Comparative analysis of properties of rapidly solidified foils of Al-Ni-Cr alloys obtained by one-side cooling (melt spinning) and two-side cooling (twin-roller quenching)

被引：1

作者：

Sivtsova, P. A. ^{[1
]}

Shepelevich, V. G. ^{[1
]}

机构：

[1] Belarusian State Univ, Minsk 220050, BELARUS

来源：

PHYSICS OF METALS AND METALLOGRAPHY | 2006年 / 101卷 / 06期

关键词：

81.20.Vj; 68.60.-p;

D O I：

10.1134/S0031918X0606007X

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The structure and microhardness of the Al-Ni-Cr-alloy foils obtained by centrifugal melt spinning and two-roller quenching have been studied. A cellular morphology of the free surface, a microcrystalline coarse-block structure, and a (111) texture which is retained upon annealing were observed in the samples. Al3Ni phase particles were found in the initial state in the foil obtained by the twin-roller technique. The microhardness of foils was found to be higher than that of bulk samples. A study of the thermal stability of the foils revealed that their aging occurs in several stages.

引用

页码：560 / 565

页数：6

共 3 条

[1] Comparative analysis of properties of rapidly solidified foils of Al-Ni-Cr alloys obtained by one-side cooling (melt spinning) and two-side cooling (twin-roller quenching)
P. A. Sivtsova
V. G. Shepelevich
The Physics of Metals and Metallography, 2006, 101 : 560 - 565
[2] Study of structure formation in ribbons of the Fe-6.5% Si alloy obtained by the one-side or two-side melt cooling
Maslov, V.V.
Nosenko, V.K.
Yurisch, M.
Metal Physics and Advanced Technologies, 1998, 17 (05): : 579 - 591
[3] A study of structure formation in ribbons of the Fe-6,5% Si alloy obtained by the one-side or two-side melt cooling
Maslov, VV
Nosenko, VK
Yurish, M
METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 1997, 19 (05): : 54 - 61

← 1 →