Modulation calorimetry in diamond anvil cells. I. Heat flow models

Numerical simulations of heat transport in diamond anvil cells reveal a possibility for absolute measurements of specific heat via high-frequency modulation calorimetry. Such experiments could reveal and help characterize temperature-driven phase transitions at high-pressure, such as melting, the glass transition, magnetic and electric orderings, or superconducting transitions. Specifically, we show that calorimetric information of a sample cannot be directly extracted from measurements at frequencies slower than the timescale of conduction to the diamond anvils (10s-100s of kHz) since the experiment is far from adiabatic. At higher frequencies, laser-heating experiments allow relative calorimetric measurements, where changes in specific heat of the sample are discriminated from changes in other material properties by scanning the heating frequency from similar to 1 MHz to 1 GHz. But laser-heating generates large temperature gradients in metal samples, preventing absolute heat capacities to be inferred. High-frequency Joule heating, on the other hand, allows accurate, absolute specific heat measurements if it can be performed at high-enough frequency: assuming a thin layer of KBr insulation, the specific heat of a 5 lm-thick metal sample heated at 100 kHz, 1MHz, or 10MHz frequency would be measured with 30%, 8%, or 2% accuracy, respectively. Published by AIP Publishing.