TiB2/AlN/Cu functionally graded materials (FGMs) fabricated by spark plasma sintering (SPS) method

被引：9
|
作者：
Jin, SZ
Zhang, HL
Li, JF [1 ]
Jia, SS
机构：
[1] Tsing Hua Univ, Dept Mat Sci & Engn, State Key Lab New Ceram & Fine Proc, Beijing 100084, Peoples R China
[2] Changchun Univ Technol, Sch Mat Sci & Engn, Changchun 130012, Peoples R China
[3] Jilin Univ, Sch Mat Sci & Engn, Changchun 130017, Peoples R China
来源：
HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2 | 2005年 / 280-283卷
关键词：
functionally graded material; TiB2/AlN/Cu; spark plasma sintering;
D O I：
10.4028/www.scientific.net/KEM.280-283.1881
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The TiB2/(TiB2+AlN)/AlN/(AlN+Cu)/Cu functionally graded materials were successfully fabricated via spark plasma sintering (SPS) method, in which a temperature gradient was achieved by using a specially designed mold and different sintering sequences were carried out. XRD analysis and SEM observations were respectively performed upon the TiB2/AlN/Cu composites. The results show that no new phases were introduced into the composites after mechanically milling or SPS process. The layered composites were found to have a dense microstructure, which changes gradually along a composition gradient. The present FGMs are developed as electrode materials of a solar thermoelectric module.
引用
收藏
页码：1881 / 1884
页数：4
相关论文
共 50 条
  • [1] Large-size WC/Co functionally graded materials fabricated by spark plasma sintering (SPS) method
    Tokita, M
    FUNCTIONALLY GRADED MATERIALS VII, 2003, 423-4 : 39 - 44
  • [2] Spark Plasma Sintering of AlN/Al Functionally Graded Materials
    Xiu, Ziyang
    Ju, Boyu
    Liu, Saiyue
    Song, Yiwei
    Du, Jindan
    Li, Zhimin
    Zhou, Chang
    Yang, Wenshu
    Wu, Gaohui
    MATERIALS, 2021, 14 (17)
  • [3] AlN-TiB2 composites fabricated by spark plasma sintering
    Zhang, XY
    Tan, SH
    Jiang, DL
    CERAMICS INTERNATIONAL, 2005, 31 (02) : 267 - 270
  • [4] TiB2 composites fabricated by spark plasma sintering at low temperature
    Liu, Luo-Jin
    Zhang, Zhao-Hui
    Jia, Xiao-Tong
    Wang, Qiang
    Xu, Tian-Hao
    Hu, Jia-Zhao
    Cheng, Xing-Wang
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2024, 132 (03) : 121 - 127
  • [5] Sintering behavior of fly ash/NiCr functionally graded materials prepared by spark plasma sintering (SPS)
    Daio M.
    Hasezaki K.
    Shinoda R.
    Oikawa T.
    Yoshioka I.
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2010, 57 (05): : 333 - 337
  • [6] Densification, microstructure and properties of TiB2 ceramics fabricated by spark plasma sintering
    Balci, Ozge
    Burkhardt, Ulrich
    Schmidt, Marcus
    Hennicke, Juergen
    Yagci, M. Baris
    Somer, Mehmet
    MATERIALS CHARACTERIZATION, 2018, 145 : 435 - 443
  • [7] Preparation of Functionally Graded Materials (FGMs) using coal fly ash and NiCr-based alloy powder by spark plasma sintering (SPS)
    Kaneko, Gen-yo
    Kitagawa, Hiroyuki
    Hasezaki, Kazuhiro
    Ito, Yuji
    Kakuda, Hideaki
    MULTISCALE AND FUNCTIONALLY GRADED MATERIALS, 2008, 973 : 604 - +
  • [8] Cu/AlN composite and functionally graded materials with high strength and high electrical- and thermal-conductivity fabricated by spark plasma sintering
    Watanabe, Yoshimi
    Ohtawa, Yoshimasa
    Miyazaki, Hidetoshi
    Sato, Hisashi
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2024, 63 (11)
  • [9] Cu/AlN composite and functionally graded materials with high strength and high electrical- and thermal-conductivity fabricated by spark plasma sintering
    Watanabe, Yoshimi
    Ohtawa, Yoshimasa
    Miyazaki, Hidetoshi
    Sato, Hisashi
    Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, 1600, 63 (11):
  • [10] Densification and Microstructure of Monolithic TiN and TiB2 Fabricated by Spark Plasma Sintering
    Kitiwan, Mettaya
    Ito, Akihiko
    Goto, Takashi
    MATERIALS INTEGRATION, 2012, 508 : 38 - 41
12345