Reduction behavior of SnO2 in the tin-bearing iron concentrates under CO-CO2 atmosphere. Part I: Effect of magnetite

被引:40
|
作者
Su, Zijian [1 ]
Zhang, Yuanbo [1 ]
Liu, Bingbing [1 ]
Zhou, Youlian [1 ]
Jiang, Tao [1 ]
Li, Guanghui [1 ]
机构
[1] Cent S Univ, Sch Minerals Proc & Bioengn, Peace Bldg 245, Changsha 410083, Hunan, Peoples R China
基金
中国国家自然科学基金;
关键词
Tin-bearing iron concentrate; Cassiterite; Reduction volatilization; Fe-Sn spinel;
D O I
10.1016/j.powtec.2015.12.047
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
A selective reduction volatilization (SRV) process developed by the authors could remove excessive tin from the complex tin-bearing iron concentrates. But it was especially noteworthy that the volatilization ratio of Sn and the residual tin content were obviously influenced by the variation of roasting parameters during the SRV process. Hence, the existence form of residual tin in the roasted products and the possible reactions between SnO2 and Fe3O4 need to be further determined. In the present study, the effect of roasting parameters on the reduction of SnO2 in the tin-bearing iron concentrates was first investigated. Then, samples with diverse cassiterite/magnetite (C/M) mass ratios were used to determine the effect of magnetite on phase transformation of SnO2 by using XRD, SEM-EDS, etc. The results indicated that magnetite markedly affected the tin volatilization and phase transformation of SnO2 under CO-CO2 atmospheres. Fe-Sn spinel was easily formed during the reduction process, and higher roasting temperatures promoted the formation of Fe-Sn spinel, which had an adverse effect on the Sn volatilization ratio. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:251 / 259
页数:9
相关论文
共 50 条
  • [1] Reduction behavior of SnO2 in the tin-bearing iron concentrates under CO-CO2 atmosphere. Part II: Effect of quartz
    Zhang, Yuanbo
    Su, Zijian
    Liu, Bingbing
    Zhou, Youlian
    Jiang, Tao
    Li, Guanghui
    POWDER TECHNOLOGY, 2016, 291 : 337 - 343
  • [2] REDUCTION BEHAVIOR OF Tin-CONTAINING PHASE IN Tin-BEARING IRON CONCENTRATES UNDER CO-CO2 MIXED GASES
    Yu, Y.
    Li, H-J
    Li, L.
    JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2019, 55 (02) : 177 - 185
  • [3] BEHAVIOR OF SnO2 IN THE TIN-BEARING IRON CONCENTRATE DURING A REDUCTION SINTERING PROCESS
    Su, Z.
    Zhang, Y.
    Liu, B.
    Chen, J.
    Li, G.
    Jiang, T.
    JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2017, 53 (01) : 67 - 74
  • [4] Effect of CaF2 On the Reduction Volatilization of Tin Oxide Under CO-CO2 Atmosphere
    Su, Zijian
    Zhang, Yuanbo
    Liu, Bingbing
    Chen, Yingming
    Li, Guanghui
    Jiang, Tao
    MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW, 2017, 38 (03): : 207 - 213
  • [5] Phase transformation of Sn in tin-bearing iron concentrates by roasting with FeS2 in CO-CO2 mixed gases and its effects on Sn separation
    Yu, Yong
    Li, Lei
    Wang, Jiayun
    Li, Kongzhai
    Wang, Hua
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 750 : 8 - 16
  • [6] Reduction kinetics of SnO2 and ZnO in the tin, zinc-bearing iron ore pellet under a 20%CO-80%CO2 atmosphere
    Zhang, Y. B.
    Su, Z. J.
    Zhou, Y. L.
    Li, G. H.
    Jiang, T.
    INTERNATIONAL JOURNAL OF MINERAL PROCESSING, 2013, 124 : 15 - 19
  • [7] Effect of CaCO3 on the Gaseous Reduction of Tin Oxide Under CO-CO2 Atmosphere
    Su, Zijian
    Zhang, Yuanbo
    Liu, Bingbing
    Chen, Jun
    Li, Guanghui
    Jiang, Tao
    MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW, 2016, 37 (03): : 179 - 186
  • [8] Tin Removal from Tin-Bearing Iron Concentrate with a Roasting in an Atmosphere of SO2 and CO
    Li, Lei
    Xu, Zhipeng
    Wang, Shiding
    METALS, 2022, 12 (11)
  • [9] Formation kinetics of Na2SnO3 from SnO2 and Na2CO3 roasted under CO-CO2 atmosphere
    Liu, Bingbing
    Zhang, Yuanbo
    Su, Zijian
    Li, Guanghui
    Jiang, Tao
    INTERNATIONAL JOURNAL OF MINERAL PROCESSING, 2017, 165 : 34 - 40
  • [10] REDUCTION BEHAVIOR OF MAGNETITE PELLETS BY CO-CO2 MIXTURES USING DIRECT REDUCTION PROCESS
    Han, Guihong
    Wang, Wenjuan
    Huang, Yanfang
    Dang, Dianyuan
    Jiang, Tao
    7TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2016, : 691 - 698