Transient deformation of thin metal sheets during pulsed laser forming

被引：32

作者：

Lee, KC ^{[1
]}

Lin, J ^{[1
]}

机构：

[1] Natl Cheng Kung Univ, Dept Mech Engn, Tainan 701, Taiwan

来源：

OPTICS AND LASER TECHNOLOGY | 2002年 / 34卷 / 08期

关键词：

pulsed laser forming; transient deformation; stress analysis;

D O I：

10.1016/S0030-3992(02)00088-9

中图分类号：

O43 [光学];

学科分类号：

070207 ; 0803 ;

摘要：

The transient deformation of thin grade 304 stainless steel metal sheets heated by a single pulse of a CO2 laser beam is simulated in this paper. The laser beam is assumed to be line-shaped and the problem is treated as three-dimensional thermo-elastoplastic. The temperature field, deformation pattern, stress-strain states and the residual stress distribution of the specimens have been calculated numerically and the transient response of the bending angle has been validated by experiments. Good agreement has been obtained between the numerical simulation and the experiments under various operating conditions. The numerical study reveals that a high temperature gradient exists for a positive bending angle and a low one for a negative angle. It transpires that the mechanisms of pulsed laser forming arc dependent mainly upon the laser power, the heating time, the clamping arrangement, as well as the geometry, the thermal properties and the original stress states of the specimen. (C) 2002 Elsevier Science Ltd. All rights reserved.

引用

页码：639 / 648

页数：10

共 50 条

[1] Experimental investigations on spatial and temporal laser irradiations in pulsed laser forming of thin metal sheets
Maji, Kuntal
[J]. JOURNAL OF LASER APPLICATIONS, 2019, 31 (04)
[2] Thermal-mechanical analysis on the transient deformation during pulsed laser forming
Hsieh, HS
Lin, JM
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (2-3): : 191 - 199
[3] Pulsed laser-induced forming of thin sheet metal
Petrov, A. A.
Kochetov, A. D.
[J]. FUNDAMENTALS OF LASER-ASSISTED MICRO- AND NANOTECHNOLOGIES 2010, 2011, 7996
[4] Laser forming thin aluminum sheets
Li, LQ
Chen, YB
Lin, SY
[J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2003, 13 : 161 - 164
[5] Electromagnetic forming of thin metal sheets
[J]. Meriched, Ali, 1808, IEEE, Piscataway, NJ, United States (36)
[6] Electromagnetic forming of thin metal sheets
Meriched, A
Féliachi, M
Mohellebi, H
[J]. IEEE TRANSACTIONS ON MAGNETICS, 2000, 36 (04) : 1808 - 1811
[7] Parametric Study and Optimization of Pulsed Laser Thermal Micro-Forming of Thin Sheets
Maji, Kuntal
[J]. INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2019, 9 (02) : 47 - 61
[8] Investigating the buckling deformation of thin metal sheets during the blanking process
Al-Rubaye, Ammar Dawood Ghali
Abid, Sallal R.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2023, 237 (10) : 2164 - 2176
[9] Investigation of the Transient Deformation in the Flexible Forming of Laminated Composite Metal Sheets Using Plasma Arc
Song, W. Q.
Xu, W. J.
Wang, X. Y.
Meng, J. B.
Jiang, J. S.
[J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL 1: ADVANCED MANUFACTURING TECHNOLOGY AND EQUIPMENT, AND MANUFACTURING SYSTEMS AND AUTOMATION, 2009, 626-627 : 315 - 320
[10] Keyhole shapes during laser welding of thin metal sheets
Aalderink, B. J.
de Lange, D. F.
Aarts, R. G. K. M.
Meijer, J.
[J]. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2007, 40 (17) : 5388 - 5393

← 1 2 3 4 5 →