SAFETY ASSESSMENT FRAMEWORK OF DESKTOP 3D PRINTERS

被引：0

作者：

Peh, Zhen Kai ^{[1
]}

Yeong, Wai Yee ^{[1
]}

机构：

[1] Nanyang Technol Univ, Sch Mech & Aerosp Engn, Singapore Ctr 3D Printing, 50 Nanyang Ave, Singapore 639798, Singapore

来源：

PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING | 2018年

关键词：

Safety Assessment; 3D Printing; Additive Manufacturing; Risk Assessment;

D O I：

10.25341/D4N88G

中图分类号：

R318 [生物医学工程];

学科分类号：

0831 ;

摘要：

The influx of consumer-scale 3D printers in the market in recent years had seen many such desktop-based machines going into schools, homes and offices. However, there are open questions about the use of desktop 3D printers, with no specific standards directly associated with these products currently. In this paper, a qualitative safety assessment framework has been developed based on a Hazard Based Safety Engineering (HBSE) approach. It encompasses wide ranging aspects of the usage desktop 3D printers. These would help to determine the important criteria to consider when adopting 3D printing technologies.

引用

页码：420 / 425

页数：6

共 50 条

[1] Ultrafine particle emissions from desktop 3D printers
Stephens, Brent
Azimi, Parham
El Orch, Zeineb
Ramos, Tiffanie
[J]. ATMOSPHERIC ENVIRONMENT, 2013, 79 : 334 - 339
[2] Evaluation of particle emissions at workplaces of operators of desktop 3D printers
Dobrzynska, Elzbieta
Kondej, Dorota
Szczepanski, Grzegorz
Okolowicz, Adrian
[J]. PRZEMYSL CHEMICZNY, 2023, 102 (01): : 95 - 101
[3] Fine Particulate and Chemical Emissions from Desktop 3D Printers
Davis, Aika
Black, Marilyn
Zhang, Qian
Wong, Jenny P. S.
Weber, Rodney
[J]. 2016 ASHRAE ANNUAL CONFERENCE PAPERS, 2016,
[4] Large volume syringe pump extruder for desktop 3D printers
Pusch, Kira
Hinton, Thomas J.
Feinberg, Adam W.
[J]. HARDWAREX, 2018, 3 : 49 - 61
[5] Characterization of Volatile and Particulate Emissions from Desktop 3D Printers
Finnegan, Melissa
Thach, Colleen Lee
Khaki, Shirin
Markey, Emma
OConnor, David J.
Smeaton, Alan F.
Morrin, Aoife
[J]. SENSORS, 2023, 23 (24)
[6] Potential Power Management Efficiency Improvements in Desktop 3D Printers
Vladinovskis, Vlads
[J]. 2022 IEEE 63TH INTERNATIONAL SCIENTIFIC CONFERENCE ON POWER AND ELECTRICAL ENGINEERING OF RIGA TECHNICAL UNIVERSITY (RTUCON), 2022,
[7] Comparison of ranking models to evaluate desktop 3D printers in a growing market
Lopes, Amit J.
Perez, Mireya A.
Espalin, David
Wicker, Ryan B.
[J]. ADDITIVE MANUFACTURING, 2020, 35
[8] Investigation of Ultrafine Particle Emissions of Desktop 3D Printers in the Clean Room
Zhou, Yu
Kong, Xiangri
Chen, Ailu
Cao, Shijie
[J]. 9TH INTERNATIONAL SYMPOSIUM ON HEATING, VENTILATION AND AIR CONDITIONING (ISHVAC) JOINT WITH THE 3RD INTERNATIONAL CONFERENCE ON BUILDING ENERGY AND ENVIRONMENT (COBEE), 2015, 121 : 506 - 512
[9] A Command Generation Approach for Desktop Fused Filament Fabrication 3D Printers
Yaman, Ulas
Dolen, Melik
[J]. PROCEEDINGS OF THE IECON 2016 - 42ND ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2016, : 4582 - 4587
[10] Accuracy of 6 Desktop 3D Printers in Dentistry: A Comparative In Vitro Study
Mangano, Francesco G.
Admakin, Oleg
Bonacina, Matteo
Biaggini, Francesco
Farronato, Davide
Lerner, Henriette
[J]. EUROPEAN JOURNAL OF PROSTHODONTICS AND RESTORATIVE DENTISTRY, 2020, 28 (02): : 75 - 85

← 1 2 3 4 5 →